What is the HUTCH Mod - Page 2 - TheDieselGarage.com
Thread Details Posted by Tornsteel, this thread has received 17 replies and been viewed 4872 times.

Reply
 
LinkBack Thread Tools Display Modes
post #11 of 18 (permalink) Old 04-18-2006, 09:33 PM
RSP
Rockin-S
 
Join Date: Sep 2005
Posts: 215
Points: 1,951
Thanks: 0
Thanked 0 Times in 0 Posts
I have never heard of it called the Hutch mod. It has always been called the harpoon mod as far as I know.

97 F350 PSD Crew Cab 4X4 Almost Stock :umno:
79 F250 CTD Super Cab 4X4 Almost Stock
79 F150 Reg Cab 4X4 Whimpy 512 CI BigBlock Some day it will be a CTD too
RSP is offline  
Sponsored Links
Advertisement
 
post #12 of 18 (permalink) Old 04-18-2006, 09:36 PM
some kinda diesel oracle
 
Join Date: Aug 2005
Posts: 210
Points: 7,472
Thanks: 0
Thanked 0 Times in 0 Posts
Quote:
Originally Posted by RSP
I have never heard of it called the Hutch mod. It has always been called the harpoon mod as far as I know.
The "Harpoon" mod is when you cut the vent and/or fill tubes only. The "hutch" is when you perform the mods to the pickup and pre-pump lines.

Hammer

2001 F250 Lariat CC/SB 4x4 7.3 auto TERMINATOR HPOS...Ceramic coated Garrett GTP-38R with BBHA & GDS outlet...DP-tuner F5...ITPdiesel Fueling and overboost regulator...6.0 CAC...AFE Stage-II PG7... Magnaflow 3.5dp/4exh...5R110 TC, BTS VB, John Wood pump mods, & V10 cooler...Schaeffer's 9000 5w-40...Oilguard bypass...and other stuff

2002 Corvette Z06 Parts soon to be installed: American Racing 1.75" "grey Ice" Ceramic coated headers without Cats...CNC ported and hand finished AFR 205 heads milled to 61CC chambers w/ 8019 springs...ported FAST 90/90...Custom Comp LSK lobe Cam 223/227 .637/.639 114+2...And to be tuned by yours truly with HP tuners

1997 Yamaha YZF-1000R
1994 Camaro Z28


Carolina PSD club
TheHammer69 is offline  
post #13 of 18 (permalink) Old 04-18-2006, 10:28 PM
RSP
Rockin-S
 
Join Date: Sep 2005
Posts: 215
Points: 1,951
Thanks: 0
Thanked 0 Times in 0 Posts
OK ya I guess I knew it was the fill and vent tubes But I didnt realize there was a name for the rest of it

97 F350 PSD Crew Cab 4X4 Almost Stock :umno:
79 F250 CTD Super Cab 4X4 Almost Stock
79 F150 Reg Cab 4X4 Whimpy 512 CI BigBlock Some day it will be a CTD too
RSP is offline  
post #14 of 18 (permalink) Old 04-19-2006, 01:07 AM
Senior Member
 
Join Date: Mar 2006
Posts: 1,592
Points: 20,383
Thanks: 0
Thanked 1 Time in 1 Post
Make sure you get rid of the qwik fitting on the fuel pump, the sucthion side. this is where i always find them sucking air. alot of nosiey trucks that i have looked at are caused from aerated fuel. fallow the fitting back to the steel line, this is where i cut the factory black plastic off. push on your rubber hose and clamp. I use a clear fuel filter in between the pump and factory steel line.:Thumbup:
imported_diesel71 is offline  
post #15 of 18 (permalink) Old 04-19-2006, 04:03 AM Thread Starter
Senior Member
Threadstarter
 
Tornsteel's Avatar
 
Join Date: Mar 2006
Posts: 507
Points: 31,563
Thanks: 5
Thanked 6 Times in 6 Posts
Thanks guys this sight is so awesome (especially when you have money to spend). I would really like to do the regulated return as well but need to save up for it.

2006 XLT 6.0, 72,000 miles. First owner. Build date 10/05, CC,LB,3.73LS,SRW,ISSPRO Pyro-Boost-Trans on the APillar,ARP Studs,Stock HG's,ELITE SCT Tadd's Tunes,Sinister SCT,Innovative tunes,EGR delete,4" turbo back dual exhst, zoodad, ccv mod, Coolant bypass filter, Cage leveling kit,upfitter high idle, running Amsoil 3000 with Archoil, 6.4 banjo's, Blue spring, 03 Turbo w/ 03 pedestal.
Issues: Rear main seal at 1'700 mls. EGR valve, EGR cooler and Oil cooler @ about 43k, Stock Head Gaskets @55k, Black Onyx HG's @72k.
http://www.thedieselgarage.com/galle...028_393362.jpg



Sean H
Tornsteel is offline  
post #16 of 18 (permalink) Old 04-19-2006, 01:50 PM
Supporting Vendor
 
Join Date: Jan 2006
Posts: 2,311
Points: 44,816
Thanks: 33
Thanked 108 Times in 97 Posts
I have instruction for the DIY folks on the site under the documentation section. I'll need to add the Pre-pump instructions aswell.


05/2009 F350 2WD CC DUALLY EBONY (Inside/Out) dropped 3/5 on 305/45-22 - dubbed "Cat Woman"
dfuser is offline  
post #17 of 18 (permalink) Old 04-19-2006, 03:00 PM
AMERICAN INGENUITY
 
Join Date: Feb 2005
Posts: 1,181
Points: 18,516
Thanks: 0
Thanked 0 Times in 0 Posts
Quote:
Originally Posted by QtrHorse
As already stated, there are a few vendors who sell the intank mod kit. ITP is one and Diesel Innovations is another. If you have a couple of friends, you can take the bed off and have it done in 2-3 hours, w/ a few breaks in between (this is w/ you taking your time and not rushing). I highly recommend for you to use some type of cut off wheel (dremel works great) when cutting the factory steel lines and make sure to debur anything you cut. I used ITP's kit and was very pleased w/ the instructions and items that it included. You could also buy his regulated return it w/ it and save a few $$.
I suggest a mini tubing cutter for a straight burr free cut if you have an inch of space all around the line.

The Racer X Built- E4OD THAT CAN -Video. 1997 Ford F-350 7.3 twin turboed PSD. Powered by 473 + cc's of Fuel and Nitrous. TDG members & team: Booner, Fuzzys69, Pipewhiner...Family owned & sponsored by :
DIY-injectors tdg's DZLJIM

American Ingenuity, Half Of American is I CAN.
LC-39A SA-506 SM-107 LM-5 CM-107

Visit us at :Racer X Automotive
RacerX is offline  
post #18 of 18 (permalink) Old 04-19-2006, 04:05 PM
Internet know it all
 
Join Date: Aug 2005
Posts: 230
Points: 920
Thanks: 0
Thanked 0 Times in 0 Posts
Quote:
Originally Posted by Giantpowerstrokediesels
I suggest a mini tubing cutter for a straight burr free cut if you have an inch of space all around the line.
That's what I used but it leaves that little pushed in edge all the way around. You will need to reem the tubing after using a roll type cutter. That little ridge that it leaves will cause turbulences and bubbles in the fuel.

99.5 F250 XLT S/C 6SPD
ITP Intank Mods*LUK clutch w/ Kevlar pilot*AFE Stage 1*Red Top Optimas*Fumoto*Reflexxion Cowl Hood

Truck Pic's

For the idiot at large. Unless I actually make a post or put a link in my signature that I have something for sale, I do not.
QtrHorse is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the TheDieselGarage.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome