Cummins n14 fuel check valve - TheDieselGarage.com
Thread Details Posted by BSouth, this thread has received 1 replies and been viewed 8472 times.

 
LinkBack Thread Tools Display Modes
post #1 of 2 (permalink) Old 01-01-2011, 10:25 PM Thread Starter
Dump Truckin SOB
 
BSouth's Avatar
 
Join Date: Jan 2010
Location: Joplin MO
Posts: 90
Points: 27,654
Thanks: 26
Thanked 3 Times in 3 Posts
Cummins n14 fuel check valve

I've been having a problem with a hard start lately on my truck. Its a 370hp n14 in a 96 Freightliner FLD. Sometimes it will fire right up but sometimes it has to crank a little bit to get started. Was wondering where the check valve was on this truck. I took the line off the front side of the ecm where it comes out of the block. There was a 90 degree fitting coming out of it but nothing inside it. Is there suppose to be one there or is it somewheres else? I just switched my filter head over from the upside down filter with the clear canister to a baldwin filter head running a 1259 baldwin filter. Any info is appreciated.
Brian
BSouth is offline  
Sponsored Links
Advertisement
 
post #2 of 2 (permalink) Old 01-04-2011, 12:22 AM
Junior Member
 
mrdevildog's Avatar
 
Join Date: Sep 2010
Location: arkansas
Posts: 63
Points: 17,969
Thanks: 0
Thanked 9 Times in 9 Posts
i've seen where a check valve was never installed, it should be connected to the fuel line going from fuel filter head to ecm cooling plate screwing into the ecm cooling plate,if you have a gauge you can check your fuel pressure and see if its in spec. can also check the metal screen in the top of the fuel pump for crud, its on top of the pump to the left of the metal line, will need a 9/16 wrench of big flat tip screw driver to remove the cap.
mrdevildog is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the TheDieselGarage.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Need jegs part # for fuel 90 check valve fittings PiRiPi 2003-2007 6.0L Power Stroke 2 12-05-2009 11:53 PM
Fuel Line Check Valve Location... MrDanB 7.3L and 6.9 IDI (Pre 1994) 2 03-29-2009 11:46 PM
stock cummins 12 valve fuel injectors NSXnTruckguy Whats Been Sold 1 07-02-2007 12:16 AM
cummins 60 lbs valve springs 12 valve imported_machine2 Whats Been Sold 0 05-07-2007 11:58 PM
Check valve in fuel line Extended Power 2003-2007 6.0L Power Stroke 16 09-18-2006 03:34 PM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome