Join Date: Aug 2009
Thanked 0 Times in 0 Posts
DT 466 E stalls when it reaches operating temp
here is my problem , Year 1999 Model 4700 Internationl Engine DT 466 E .
when the engine reaches operating temp.( dash reads 197-198 degrees ) the engine will start to stall out slowly white smoke out stack.Leave truck stand and cool for 2-5 min. truck starts right up.Here is what i have checked new cam sensor,injectors sent in and checked ,new seal washers injector tips copper verses stainless,checked fuel pressure of supply pump fuel 65 psi cold 45 psi warm,run truck on remote fuel bottle check for air very very small bubbles on return fuel ,possible pressure return int to bottle the cause. With no luck ,run codes ,none preset, I can set my watch with the it happens.Standing still run engine to temp. 195-198 degrees . wait 3-5 minute truck will shut right down. Sent truck to shop ,they said cam moving back and fourth 50 thousands , shimmed it out and its fixed, ya right, they can't seam to find problem . ANY HELP !!! catwrench