|
bigblockdiesel21 10-25-2006, 12:38 AM ok guys..i havent made a post in a while because ive been pretty busy.. but i just finishing puttin my 90 together i had to put a new front clip on it...new fenders, core support, radiator, and batteries while i was in there..but now when i start it my tach sits at about 300rpm when i hit the go pedal it jumps about 200rpm but thats it..would this be a wiring problem or what can anyone help me out.. thanks. trent ZPI28 10-26-2006, 02:47 AM Check the wires on the magnetic pickup thats located on the IP gear cover. I know mine does almost the same thing and my wires are naked. Ill be getting a new one from ford at $45. Steven bigblockdiesel21 10-27-2006, 01:49 AM hey thanks a lot but im still a lil slow on everything on these engines is that the thing that like screws into the aluminum cover there on the front??? thanks trent ZPI28 10-27-2006, 07:48 PM Yes thats the culprit. 86 1 tonhauler 10-30-2006, 02:16 AM i need a tach for my truck, is there a kit for my 6.9l :thanks: ZPI28 10-31-2006, 01:58 AM You will need to get a instrument cluster with a factory tach. Then you will need the tach signal sensor that mounts on the IP cover. Your truck should have the stock wiring for this on the fender well. Steven 86 1 tonhauler 11-02-2006, 12:55 AM sweet im going to get it this week:Thumbup: :thanks: | |