The Diesel Garage banner

Pump diagram for 855 cummins

39K views 10 replies 7 participants last post by  ynot 
#1 ·
Does anyone have a diagram for the PT pump? Or is there a place I can download a pump manual?

Thanks,
Tim
 
#2 ·
#3 ·
:shrugsI have some Diagrams, but they are old. I was looking for them as well, and i found it in a library in my city and they didn't let me check out the book. I copied them, if you send me a fax number or i can scan them and then email it to you. I don't know if you'll need them because the pump is old and its a PT.:eek:
 
#6 ·
This is on a 1979 290.

I really just like to know how things work. So it's not imperative that I find a diagram. I have an old diagram from probably the 60's.

When I'm accelerating through the gears at a certain rpm and load I guess the boost from the turbo signals the pump to pump more fuel. The increase in power is very noticeable. I'm just curious whats going on. It would be nice to have the boost a little sooner.
 
#7 ·
Thats the AFC valve doing it's thing, holding back fuel until it sees boost to burn it cleanly. Pry the tin cover thats behind the throttle arm off, there is a screw that stares you in the face, back the lock nut off and screw it in some, try it. That'll give you better throttle responce.
 
#9 ·
Imagine my surprise to see the one and only French Electrician on the diesel forum. I don't post much (as SmithBuilt) but have seen your posts over on the MH forum.

Thanks for the diagram. It appears that pump does not have the AFC.



Thanks itali83 I will try that.

Tim
 
#10 ·
Ouaip., vous l'avez obtenu corrects c'est le seul vrai Électricien français et je travaille vraiment sur un peu de plus grand moteur diesel plus commun trouvé sur des plus grandes unités de générateur.

Par la voie le diagramme j'ai posté ici il n'y avait pas AFC ainsi la valve AFC sera trouvée entre la valve coupée et le corps de pompe cependant il y a quelques modèles qui ont l'AFC sera sur la couverture ronde où Max et la vis de vitesse inoccupée seront placés aussi.

Yep., you got it correct it is the only true French Electrician and I do work on a bit of larger diesel engine more common found on larger generator units.

by the way the diagram I posted here it did not have AFC on it so the AFC valve will be found between the shut off valve and the pump body however there are some models that have the AFC will be on the round cover where the max and idle speed screw will be located as well.

Merci,Marc
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top