The Diesel Garage banner

2008 crew cab short bed lift help

3K views 2 replies 2 participants last post by  08smoker08 
#1 ·
So i am looking in to lifting the truck just a smidge so that i can put 35" tires on comfortably. I know that they will probably fit without rubbing on my stock setup. I have looked into the 2.5" leveling kits and have heard good things and bad about them. I have also looked into the 2.5" front and 2" rear lifts. Anyhow what I am trying to get at is if i lift the truck 2 or so inches what all gets out of whack and has to be adjusted for.



I know i probably need traction/ladder bars

track bar re-locator

caster adjustment?

as well the correct backspacing/offset for the tires so they don't rub or stick out too far.



Anything else that i am missing.

This is going to be expensive!
 
#3 ·
do you ahve any issues with the 35's on the stock 20s, meaning troubles balancing?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top