right hub bearing help needed

cookiemonsterblue · 03-01-2007, 06:15 PM

the bearings in my right front hub need to be addressed immediatly, a new assembly is $300 is there a way to just replace the bearing???

broke as a joke in michigan

03-01-2007, 07:17 PM

It is a non-serviceable hub assembly. Although you should be able to find one cheaper than $300 though. Where did you price that at?

akapparos · 03-01-2007, 08:14 PM

That definately sounds a little high to me. call around and see if you can come up with a better price.

steved · 03-01-2007, 11:27 PM

Napa usually has them for cheaper, unless it is a ABS version...

As for the unit bearing...the races are a machined surface inside the hub and not replaceable...

steved

cookiemonsterblue · 03-04-2007, 12:08 AM

i found one online at 197 if anyone knows of any cheaper let me know. anyone got an opinion on using used from salvage yard?

03-01-2007, 06:15 PM	#1
cookiemonsterblue cookiemonsterblue Join Date: May 2006 Posts: 169 Points: 1,156 Thanks: 0 Thanked 0 Times in 0 Posts	right hub bearing help needed the bearings in my right front hub need to be addressed immediatly, a new assembly is $300 is there a way to just replace the bearing??? broke as a joke in michigan

03-01-2007, 08:14 PM	#3
akapparos TDG Mafia Member #21 Join Date: Jan 2006 Posts: 1,344 Points: 2,172 Thanks: 0 Thanked 0 Times in 0 Posts	That definately sounds a little high to me. call around and see if you can come up with a better price. __________________ http://www.thedieselgarage.com/galle.../8/4/4/ram.gif "01" Dodge 3500 DRW. Goerend Bros w/ triple disk, Edge Drag Comp, Jammer Stage 5's, Turnbuckle, Dakota Digital and ISSPRO Gauges, BHAF,4" FLO-PRO exhaust, Vulcan kit, Holley Blue Pump, TC Lockup Switch, Snow stage 2, a few more little bits in the works 377hp and 823tq @ Smokin' (with stage 3's/no drag upgrade) "400" club wannabe

03-01-2007, 11:27 PM	#4
steved Senior Member Join Date: Jul 2005 Posts: 557 Points: 1,335 Thanks: 0 Thanked 0 Times in 0 Posts	Napa usually has them for cheaper, unless it is a ABS version... As for the unit bearing...the races are a machined surface inside the hub and not replaceable... steved __________________ SOLD - 2004.5 2500 Ram, 600CTD, NV5600, 4.10s, FASS'd, Dynatrac Free-Spin Kit, Gulf Coast 0-1 bypass, Intake and Exhaust. New - 2012 Chevrolet Silverado 2500HD, 6.0L, 6spd auto, 4wd, 3.73s..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

New To Site?	Need Help?	TDG Specials
Register to Participate TDG Rules View Forum Leaders Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read	TDG Projects TDG Truck of the month

03-01-2007, 07:17 PM	#2
Bouncer Guest Posts: n/a Points: 0 [Check]	It is a non-serviceable hub assembly. Although you should be able to find one cheaper than $300 though. Where did you price that at?

03-04-2007, 12:08 AM	#5
cookiemonsterblue cookiemonsterblue Threadstarter Join Date: May 2006 Posts: 169 Points: 1,156 Thanks: 0 Thanked 0 Times in 0 Posts	i found one online at 197 if anyone knows of any cheaper let me know. anyone got an opinion on using used from salvage yard?

Remove Advertisements Sponsored Links
Diesel Trucks Advertisement