Stack Installtion

cope junkie · 02-05-2008, 01:49 AM

so i goin to put a stack on the kids truck for him. the Q: is how hard is it and does anybody have pictures:shrug: . It's goin to be a single stack right above the exhaust.

Dual K20s · 02-05-2008, 03:31 AM

I think its easy :shrug:

Start from underneath the truck and find where you want to run the stack from the bottom side. Drill a small pilot hole the use a hole-saw from inside the bed. Thats the only advise I have, other than that its pretty straight forward

cope junkie · 02-05-2008, 10:51 AM

i would a sawzall work

Cummins5390 · 02-05-2008, 11:59 AM

it would but it sucks go to the local hardwear store and get a holesaw that is 5inch in diameter and put in you drille in go to town heres 1 of the few i did....

**wastedwagesracing** · 02-05-2008, 12:03 PM

It's easy I put dual Grand Rocks on a few years ago. But like they said just make sure your 100% sure where the hole needs to go. I cut mine with a 5" hole saw and it worked like a champ. If you don't want to buy a hole saw let me know you pay the shipping back and forth and I will let you use mine.

Dual K20s · 02-05-2008, 05:48 PM

a sawzall will work but unless your really really good it'll look like crap

cope junkie · 02-05-2008, 06:27 PM

i just go pay one, you never know when you will never know,you mite need it for something. thanks wastedwagesracing it appreciate. oh how much do they cost

**wastedwagesracing** · 02-05-2008, 06:35 PM

Quote:

Originally Posted by cope junkie

i just go pay one, you never know when you will never know,you mite need it for something. thanks wastedwagesracing it appreciate. oh how much do they cost

I think the saw was about 30-35 bucks and the arbor another 7-10.

cope junkie · 02-05-2008, 06:42 PM

i'll go buy one and give it a shot

cope junkie · 02-05-2008, 09:46 PM

[quote=cope junkie]i'll go buy one and give it a shot[/QUOTE

just got back from buying one.......$48.78

laugh

:censored

02-05-2008, 01:49 AM	#1
cope junkie TDG Singles Club Mem #57 Join Date: Nov 2007 Posts: 551 Points: 297 Thanks: 0 Thanked 0 Times in 0 Posts	Stack Installtion so i goin to put a stack on the kids truck for him. the Q: is how hard is it and does anybody have pictures:shrug: . It's goin to be a single stack right above the exhaust. __________________ "The Sickness"2006 dodge HO 4x4 6sp Smarty Beta on#9, TS MP-8, K&N intake,South Bend Clucth, Autometer Gauges, BD Lift Pump, Silencer ring stolen, Straight Pipe, ridin on Pro Comp Exterme M/T with Eagle Alloy Rims!!!: 503HP and 981TQ and on the tailgate MIND IF I SMOKE!!!:smoke

02-05-2008, 03:31 AM	#2
Dual K20s Professional Amateur Join Date: Oct 2006 Posts: 2,224 Points: 4,149 Thanks: 1 Thanked 36 Times in 25 Posts	I think its easy :shrug: Start from underneath the truck and find where you want to run the stack from the bottom side. Drill a small pilot hole the use a hole-saw from inside the bed. Thats the only advise I have, other than that its pretty straight forward __________________ My name's Derek and this is my ride: Singles Club Member #58 98 Dodge 2500 Motor: 12 valve, BHAF, 4K GSK, O-ringed head, .020 over HG, studs, Modified AFC, DDP4 injectors, DDP DVs, 17.5* timing, 16cm^2 ex. housing, Drivetrain: 5-speed 4x4 w/ SB clutch (13" OFE 450Hp) 83 Chevy K20 with turbo 6.2 Sold It's not what you buy, It's what you build

02-05-2008, 10:51 AM	#3
cope junkie TDG Singles Club Mem #57 Threadstarter Join Date: Nov 2007 Posts: 551 Points: 297 Thanks: 0 Thanked 0 Times in 0 Posts	i would a sawzall work __________________ "The Sickness"2006 dodge HO 4x4 6sp Smarty Beta on#9, TS MP-8, K&N intake,South Bend Clucth, Autometer Gauges, BD Lift Pump, Silencer ring stolen, Straight Pipe, ridin on Pro Comp Exterme M/T with Eagle Alloy Rims!!!: 503HP and 981TQ and on the tailgate MIND IF I SMOKE!!!:smoke

02-05-2008, 11:59 AM	#4
Cummins5390 Member Join Date: Nov 2007 Posts: 112 Points: 1,996 Thanks: 0 Thanked 1 Time in 1 Post	it would but it sucks go to the local hardwear store and get a holesaw that is 5inch in diameter and put in you drille in go to town heres 1 of the few i did.... __________________ 2001 Dodge ram 2500 6 speed..ARP studs...Hot juice with attitude...ats arcflow...airdog 150...edge jammer 125s..afe stage 2...5inch exhaust w/ 6inch tip...ATS auroa 4000...southbend 3600 dualdisc clutch...: Kentucky Diesel Performance kydp1.com -Seth

02-05-2008, 12:03 PM	#5
wastedwagesracing Super Moderator- Mafia #2 Join Date: Apr 2005 Location: Lost in diesel smoke Posts: 6,048 Points: 21,557 Thanks: 326 Thanked 515 Times in 312 Posts	It's easy I put dual Grand Rocks on a few years ago. But like they said just make sure your 100% sure where the hole needs to go. I cut mine with a 5" hole saw and it worked like a champ. If you don't want to buy a hole saw let me know you pay the shipping back and forth and I will let you use mine. Attached Thumbnails __________________ --Doug--"giver 90" Thinking of buying a Diesel? Drive MY prefered brand http://www.fordvehicles.com MORE FORD POWER http://news.pickuptrucks.com/2010/08...of-torque.html http://news.pickuptrucks.com http://www.youtube.com/watch?v=Xok1M...layer_embedded http://www.popularmechanics.com/cars...omparison-test Experience is something you don't get until just after you need it.

02-05-2008, 05:48 PM	#6
Dual K20s Professional Amateur Join Date: Oct 2006 Posts: 2,224 Points: 4,149 Thanks: 1 Thanked 36 Times in 25 Posts	a sawzall will work but unless your really really good it'll look like crap __________________ My name's Derek and this is my ride: Singles Club Member #58 98 Dodge 2500 Motor: 12 valve, BHAF, 4K GSK, O-ringed head, .020 over HG, studs, Modified AFC, DDP4 injectors, DDP DVs, 17.5* timing, 16cm^2 ex. housing, Drivetrain: 5-speed 4x4 w/ SB clutch (13" OFE 450Hp) 83 Chevy K20 with turbo 6.2 Sold It's not what you buy, It's what you build

02-05-2008, 06:27 PM	#7
cope junkie TDG Singles Club Mem #57 Threadstarter Join Date: Nov 2007 Posts: 551 Points: 297 Thanks: 0 Thanked 0 Times in 0 Posts	i just go pay one, you never know when you will never know,you mite need it for something. thanks wastedwagesracing it appreciate. oh how much do they cost __________________ "The Sickness"2006 dodge HO 4x4 6sp Smarty Beta on#9, TS MP-8, K&N intake,South Bend Clucth, Autometer Gauges, BD Lift Pump, Silencer ring stolen, Straight Pipe, ridin on Pro Comp Exterme M/T with Eagle Alloy Rims!!!: 503HP and 981TQ and on the tailgate MIND IF I SMOKE!!!:smoke

02-05-2008, 06:42 PM	#9
cope junkie TDG Singles Club Mem #57 Threadstarter Join Date: Nov 2007 Posts: 551 Points: 297 Thanks: 0 Thanked 0 Times in 0 Posts	i'll go buy one and give it a shot __________________ "The Sickness"2006 dodge HO 4x4 6sp Smarty Beta on#9, TS MP-8, K&N intake,South Bend Clucth, Autometer Gauges, BD Lift Pump, Silencer ring stolen, Straight Pipe, ridin on Pro Comp Exterme M/T with Eagle Alloy Rims!!!: 503HP and 981TQ and on the tailgate MIND IF I SMOKE!!!:smoke

02-05-2008, 09:46 PM	#10
cope junkie TDG Singles Club Mem #57 Threadstarter Join Date: Nov 2007 Posts: 551 Points: 297 Thanks: 0 Thanked 0 Times in 0 Posts	[quote=cope junkie]i'll go buy one and give it a shot[/QUOTE just got back from buying one.......$48.78 laugh :censored __________________ "The Sickness"2006 dodge HO 4x4 6sp Smarty Beta on#9, TS MP-8, K&N intake,South Bend Clucth, Autometer Gauges, BD Lift Pump, Silencer ring stolen, Straight Pipe, ridin on Pro Comp Exterme M/T with Eagle Alloy Rims!!!: 503HP and 981TQ and on the tailgate MIND IF I SMOKE!!!:smoke

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

New To Site?	Need Help?	TDG Specials
Register to Participate TDG Rules View Forum Leaders Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read	TDG Projects TDG Truck of the month TDG Shirts