Dash assembly

Rich · 01-28-2006, 08:17 PM

Can someone walk me through taking the dash apart on my 06' Dodge? I think'n I could do it but I'm really good at break'n stuff.

Rich · 01-28-2006, 08:42 PM

Anyone have a clue?

Billysgoat · 01-28-2006, 10:43 PM

Get a hammer and get started

:

01-28-2006, 10:43 PM

Just start pryin on stuff

hoot · 01-28-2006, 11:52 PM

Go HERE and download the 06 manual.

You should find it under Body/Instrument Panel

Twisted Shifter · 01-28-2006, 11:56 PM

Good luck ... I have my 94 apart as we speak and it was a MOTHER *******
I need to replace the top section on my 03 and if its anything like the 94 is I am just going to smash it and start over

Rich · 01-29-2006, 12:32 AM

Quote:

Originally Posted by Twisted Shifter

Good luck ... I have my 94 apart as we speak and it was a MOTHER *******
I need to replace the top section on my 03 and if its anything like the 94 is I am just going to smash it and start over

.....that's funny right there. :roflmao:

Rich · 01-29-2006, 01:06 AM

WOW HOOT.........that's frick'n awsome! It took me almost 8 minutes to download that! :COMPCRASH .......I see DC does things a little different than GM.

Billysgoat · 01-29-2006, 02:22 PM

Quote:

Originally Posted by Rich

WOW HOOT.........that's frick'n awsome! It took me almost 8 minutes to download that! :COMPCRASH .......I see DC does things a little different than GM.

A "little" different?? :roflmao: :roflmao: :roflmao:

Rich · 01-29-2006, 03:15 PM

......Except for locks. The glove box, door locks and wedge locks all appera to be the same. Almost like they poped out'a the same plant. ........:smoke:

01-28-2006, 08:17 PM	#1
Rich Senior Member Join Date: Dec 2008 Posts: 2,655 Points: 4,400 Thanks: 1 Thanked 2 Times in 2 Posts	Dash assembly Can someone walk me through taking the dash apart on my 06' Dodge? I think'n I could do it but I'm really good at break'n stuff.

01-28-2006, 10:43 PM	#3
Billysgoat Rolling Smokeshow Join Date: May 2005 Posts: 3,005 Points: 794 Thanks: 0 Thanked 2 Times in 1 Post	Get a hammer and get started : __________________ 01' Dodge 6spd 4wd Uhhhh...the axles are still stock (for now) Smokeless???? :umno: Real men row their own SMILE! It's the second best thing you can do with your lips

01-28-2006, 11:52 PM	#5
hoot Senior Member Join Date: Jun 2005 Posts: 281 Points: 7,135 Thanks: 0 Thanked 1 Time in 1 Post	Go HERE and download the 06 manual. You should find it under Body/Instrument Panel __________________ The PLane Will Fly 04 2500 DODGE 4x4, QC SB SLT, POWER WAGON and THE MIGHTY CUMMINS 305/555, Goerend 48, Triple Disk TC, BDFlex Flexplate, F1stix, HT62/71/13 SS Turbo , Arp Head Studs, TST PowerMaxCR, Smarty, Injen/Amsoil air intake, FASS 150, Di Pricol Boost,TransTemp and Fuel Pressure, H2 Hummer Wheels & Toyo Open Country M/T's, Kore Leveling, Kore Stabilizer Drop 5" RIP Rook 6" SS TIP, Mag-Hytec Rear and Trans, Defiant Dual Steering Stab Sys, Thuren Trac Bar, Carli Light Bar, Hella's, Bushwacker Fender Flares, AirChime K3LA Locomotive Horn, Western 8.6MPV V-Plow Dynoed 5-17-08 541hp/1039tq 2004 DODGE PICS AND INFO 2001 Duramax PICS AND INFO

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

New To Site?	Need Help?	TDG Specials
Register to Participate TDG Rules View Forum Leaders Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read	TDG Projects TDG Truck of the month

01-28-2006, 08:42 PM	#2
Rich Senior Member Threadstarter Join Date: Dec 2008 Posts: 2,655 Points: 4,400 Thanks: 1 Thanked 2 Times in 2 Posts	Anyone have a clue?

01-28-2006, 10:43 PM	#4
fordt Guest Posts: n/a Points: 0 [Check]	Just start pryin on stuff

01-28-2006, 11:56 PM	#6
Twisted Shifter NHRDA Race Director Join Date: Jan 2006 Posts: 454 Points: 3,453 Thanks: 0 Thanked 0 Times in 0 Posts	Good luck ... I have my 94 apart as we speak and it was a MOTHER ******* I need to replace the top section on my 03 and if its anything like the 94 is I am just going to smash it and start over

01-29-2006, 01:06 AM	#8
Rich Senior Member Threadstarter Join Date: Dec 2008 Posts: 2,655 Points: 4,400 Thanks: 1 Thanked 2 Times in 2 Posts	WOW HOOT.........that's frick'n awsome! It took me almost 8 minutes to download that! :COMPCRASH .......I see DC does things a little different than GM.

01-29-2006, 03:15 PM	#10
Rich Senior Member Threadstarter Join Date: Dec 2008 Posts: 2,655 Points: 4,400 Thanks: 1 Thanked 2 Times in 2 Posts	......Except for locks. The glove box, door locks and wedge locks all appera to be the same. Almost like they poped out'a the same plant. ........:smoke:

Remove Advertisements Sponsored Links
Diesel Trucks Advertisement