13.87 @ 97.5 with the..... - Diesel Truck Forum - TheDieselGarage.com
Thread Details Posted by 08stroker250, this thread has received 13 replies and been viewed 1147 times.

Reply
 
LinkBack Thread Tools Display Modes
post #1 of 14 (permalink) Old 06-26-2010, 07:52 PM Thread Starter
Spartan Diesel Tech
 
08stroker250's Avatar
 
Join Date: Dec 2009
Location: Georgia
Posts: 969
Points: 42,053
Thanks: 60
Thanked 61 Times in 56 Posts
Garage
13.87 @ 97.5 with the.....

Went back to the track last night and ran a few different tunes.

I went 13.87 @ 97.5 with my daily driver 210 regular tune...which I thought was very impressive. My 60 foot was a 1.90...not that great considering I am use to low 1.70's, but I was overall impressed with the performance of the tune at the track.....especially for my daily driver tune

I ran another 12.81 @ 103 with the 310 tune. Cut a 1.700 60 foot and went 8.05 in the 1/8th on that pass.

The 350 tune didn't do so well though. I couldn't get off the line without spinning, and I wasn't maintaining rail pressure through the pass. Only held 21,000 psi up top. Went 12.89 @ 102.7 with it. Shifting also never had time to smooth out...so that had a little to do with the poor E/T I think.

Jeff Dodd - www.SpartanDieselTech.com
Email - [email protected]

2008 Ford F-250 CC/SB
08stroker250 is offline  
Sponsored Links
Advertisement
 
post #2 of 14 (permalink) Old 06-27-2010, 06:45 PM
Ford 6.4 it's just cooler
 
trapit's Avatar
 
Join Date: Dec 2008
Location: Augusta Ga
Posts: 673
Points: 27,656
Thanks: 4
Thanked 18 Times in 18 Posts
So airdog will help with the fuel pressure loss?

Paul Alewine
2008 F-250 King Ranch AFE Stage II MBRP Duals and Spartan 310 Tuned
2" BDS Lift on 35" Toyo M/T's

Singles Club #74
American Club #13
trapit is offline  
post #3 of 14 (permalink) Old 06-28-2010, 08:07 PM Thread Starter
Spartan Diesel Tech
Threadstarter
 
08stroker250's Avatar
 
Join Date: Dec 2009
Location: Georgia
Posts: 969
Points: 42,053
Thanks: 60
Thanked 61 Times in 56 Posts
Garage
I have an Air Dog

Jeff Dodd - www.SpartanDieselTech.com
Email - [email protected]

2008 Ford F-250 CC/SB
08stroker250 is offline  
post #4 of 14 (permalink) Old 06-29-2010, 12:19 AM
Senior Member
 
O2ShootTheJ's Avatar
 
Join Date: Dec 2008
Location: VA
Posts: 2,183
Points: 57,145
Thanks: 107
Thanked 131 Times in 112 Posts
He needs a modded HPFP for the FRP loss. Correct?

2008 F250 CC SB - It all wont fit in the sig so why bother?

Singles Club #222
December 2008 TOTM
Riding High Club #2
2008 Truck of the Year
Ridin' Dirty Club #2

Big Thanks to:
Smokin' Guns Peformance and Accessories - Smokingunsperf.com
Throttle Junkie Performance Parts - tjpparts.com
O2ShootTheJ is offline  
post #5 of 14 (permalink) Old 06-29-2010, 01:10 AM Thread Starter
Spartan Diesel Tech
Threadstarter
 
08stroker250's Avatar
 
Join Date: Dec 2009
Location: Georgia
Posts: 969
Points: 42,053
Thanks: 60
Thanked 61 Times in 56 Posts
Garage
Quote:
Originally Posted by O2ShootTheJ View Post
He needs a modded HPFP for the FRP loss. Correct?
Or some tuning adjustments. But yes, a HPFP and ported rails are definitely future modifications.

Jeff Dodd - www.SpartanDieselTech.com
Email - [email protected]

2008 Ford F-250 CC/SB
08stroker250 is offline  
post #6 of 14 (permalink) Old 06-29-2010, 01:54 AM
Senior Member
 
O2ShootTheJ's Avatar
 
Join Date: Dec 2008
Location: VA
Posts: 2,183
Points: 57,145
Thanks: 107
Thanked 131 Times in 112 Posts
you thinkin elite or floor it?

2008 F250 CC SB - It all wont fit in the sig so why bother?

Singles Club #222
December 2008 TOTM
Riding High Club #2
2008 Truck of the Year
Ridin' Dirty Club #2

Big Thanks to:
Smokin' Guns Peformance and Accessories - Smokingunsperf.com
Throttle Junkie Performance Parts - tjpparts.com
O2ShootTheJ is offline  
post #7 of 14 (permalink) Old 06-29-2010, 02:08 AM Thread Starter
Spartan Diesel Tech
Threadstarter
 
08stroker250's Avatar
 
Join Date: Dec 2009
Location: Georgia
Posts: 969
Points: 42,053
Thanks: 60
Thanked 61 Times in 56 Posts
Garage
Quote:
Originally Posted by O2ShootTheJ View Post
you thinkin elite or floor it?
Neither actually. Elite's pump isn't what I am looking for and Floor It's pump is doing nothing for performance because it is not modded correctly. The way I have heard it is if you could combine those two pumps together, it would be the perfect setup to be considered a "modded" pump.

There are some Elite setups that are still in the works...only time and testing will tell how well they will work. I am more interested in Industrial's pump than anything else though.

Jeff Dodd - www.SpartanDieselTech.com
Email - [email protected]

2008 Ford F-250 CC/SB
08stroker250 is offline  
post #8 of 14 (permalink) Old 06-29-2010, 02:52 AM
Senior Member
 
O2ShootTheJ's Avatar
 
Join Date: Dec 2008
Location: VA
Posts: 2,183
Points: 57,145
Thanks: 107
Thanked 131 Times in 112 Posts
hmm ok. Just wondering cuz i'm gonna be throwin one on around mid august. Hopefully something good will be out by then

2008 F250 CC SB - It all wont fit in the sig so why bother?

Singles Club #222
December 2008 TOTM
Riding High Club #2
2008 Truck of the Year
Ridin' Dirty Club #2

Big Thanks to:
Smokin' Guns Peformance and Accessories - Smokingunsperf.com
Throttle Junkie Performance Parts - tjpparts.com
O2ShootTheJ is offline  
post #9 of 14 (permalink) Old 06-29-2010, 03:16 AM Thread Starter
Spartan Diesel Tech
Threadstarter
 
08stroker250's Avatar
 
Join Date: Dec 2009
Location: Georgia
Posts: 969
Points: 42,053
Thanks: 60
Thanked 61 Times in 56 Posts
Garage
Quote:
Originally Posted by O2ShootTheJ View Post
hmm ok. Just wondering cuz i'm gonna be throwin one on around mid august. Hopefully something good will be out by then
The Industrial pump is R&R only. PM me if you want some details.

Jeff Dodd - www.SpartanDieselTech.com
Email - [email protected]

2008 Ford F-250 CC/SB

Last edited by 08stroker250; 06-29-2010 at 03:21 AM.
08stroker250 is offline  
post #10 of 14 (permalink) Old 06-29-2010, 03:28 AM
I Eat Rice
 
forcefed6.4ford's Avatar
 
Join Date: Dec 2008
Location: next door to you
Posts: 2,155
Points: 51,505
Thanks: 29
Thanked 190 Times in 157 Posts
fill me in Jeff

Lets just say not quite stock.
Slower than some. Faster than most.
Canadian Club Member #10.
Ridin High Club Member #24
Singles Club Member #469

"There is no try. Only do... That is why you fail" Yoda. The wisest green piece of rubber ever created.

2008 King Ranch/Harley mix. Spartan tuned. Elite studs, Cobbs EGR delete plates. FabTech 6" 4 link with dual 2.25" remote shocks. 18" 778 Monsters 35-12.5-18 Toyo MT's DDM 35w HID's 6000K hi/lo and fogs.
forcefed6.4ford is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Diesel Truck Forum - TheDieselGarage.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome