Silencer Ring Removal - Diesel Truck Forum - TheDieselGarage.com
Thread Details Posted by DieselMinded, this thread has received 51 replies and been viewed 25254 times.

Reply
 
LinkBack Thread Tools Display Modes
post #1 of 52 (permalink) Old 07-19-2005, 05:30 PM Thread Starter
Its Me !
 
Join Date: May 2005
Posts: 73
Points: 2,744
Thanks: 0
Thanked 0 Times in 0 Posts
Silencer Ring Removal

Silencer Ring

Ditch the Ring & Make er' Sing



A silencer ring is a metal baffle placed into the turbocharger inlet to reduce whistle from the turbocharger. It is installed in Ram truck engines at the request of Chrysler. The silencer ring has no effect on engine output, EGT, or boost levels.


Removal:

Remove the flex hose from the front of the turbo that goes to the breather. Just inside the turbo, you will see a snap ring that looks like a piston ring (charcoal color), very gently with a small flat blade screw driver, lift one end of the snap ring out of the groove, then continue to work around the snap ring, lifting it out of the groove. When the snap ring has been removed, you can easily remove the silencer ring.





WITH



WITH OUT



HERE IT IS



2oo2 - 4x4 - QC/SB - K.O.R.E. - SC 3 Disk TC - SC ProLoc VB - 5.0 KDL - HX35 12 CM - 4 " S/S BANKS - Mr. Bobs Hoses - ATS Exhaust & Intake Manifold's -Schied Valve Cover - EEP PPK - Vulcan - Haisleys ADD - Haisleys 7x14 Injectors Flowed By MDP - Schieds VP44
DieselMinded is offline  
Sponsored Links
Advertisement
 
post #2 of 52 (permalink) Old 09-15-2005, 02:02 AM
Senior Member
 
Rich's Avatar
 
Join Date: Dec 2008
Posts: 2,655
Points: 41,940
Thanks: 1
Thanked 2 Times in 2 Posts
......That has no effect other than sound?
Rich is offline  
post #3 of 52 (permalink) Old 09-16-2005, 01:40 AM
 
Join Date: Sep 2005
Posts: 32
Points: 90
Thanks: 0
Thanked 0 Times in 0 Posts
Quote:
Originally Posted by Rich
......That has no effect other than sound?
Yeah, ain't it cool!
Vulcan is offline  
post #4 of 52 (permalink) Old 09-21-2005, 11:07 PM
fordt
Guest
 
Posts: n/a
Points: 0 [Check]
:Thumbup: It's a must
post #5 of 52 (permalink) Old 01-14-2006, 06:36 PM
 
Join Date: Jan 2006
Posts: 84
Points: 1,636
Thanks: 0
Thanked 0 Times in 0 Posts
Wat About On The 06 Dodge?
FSTDZL is offline  
post #6 of 52 (permalink) Old 01-21-2006, 05:55 AM
 
Join Date: Jan 2006
Posts: 8
Points: 10
Thanks: 0
Thanked 0 Times in 0 Posts
yeah I'm curious too about the 06.....
Dieseldees is offline  
post #7 of 52 (permalink) Old 01-21-2006, 03:43 PM
Super Moderator
 
nevrenufhp's Avatar
 
Join Date: May 2005
Location: Sacramento
Posts: 3,187
Points: 104,029
Thanks: 259
Thanked 236 Times in 181 Posts
From what I've heard, the 06 has a silencer ring plus another couple criss-crossed fins up in the intake tube just a few inches from the turbo

Dale

my daily driver:67 F100, 300 4V, cammed, 4 spd.
or, 08 Subaloser Forester, 2" lift.
work rigs: 94 IH 4900, DT466(originally 230hp), #0 fuel plate, tighter gov springs, 22* timing
or, 06 IH 7400, DT466E, 300hp


My Low Buck fuel rate site:
www.freewebs.com/nevrenufhp
nevrenufhp is offline  
post #8 of 52 (permalink) Old 01-23-2006, 02:02 AM
 
Join Date: Jan 2006
Posts: 84
Points: 1,636
Thanks: 0
Thanked 0 Times in 0 Posts
are they worth tackin out?
FSTDZL is offline  
post #9 of 52 (permalink) Old 01-25-2006, 06:37 AM
 
Join Date: Jan 2006
Posts: 8
Points: 10
Thanks: 0
Thanked 0 Times in 0 Posts
took my silencer ring out the other day. Now it's a little louder through the turbo. Yeah, there is somekind of plastic crisscross pieces in the duct. Didn't want to pull it off cause I'm planning to by a Air raid system.
Dieseldees is offline  
post #10 of 52 (permalink) Old 01-25-2006, 11:37 PM
 
Join Date: Jan 2006
Posts: 84
Points: 1,636
Thanks: 0
Thanked 0 Times in 0 Posts
Yea I Took The Silencer Ring Out Of My 06 First And I Left The Crisscrossed Plastic In It Sounds The Same .then I Took The Crissed Crossed Piece Out Man!!!!!!!!! It's Loud, I Like It. I Can Turn The Radio On Full Blast And U Can Still Hear It
FSTDZL is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Diesel Truck Forum - TheDieselGarage.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Vehicle Certification Label Bcarriveau Ford - Modification instructions, Product installs and Tech Articles 7 02-28-2010 01:12 PM
F350 + GMC Brigader + Icy hills = A LITTLE FUN! STANG302 Towing and Hauling 7 01-17-2009 01:06 AM
turbo rebuild rollin coal 2003-2007 6.0L Power Stroke 14 12-31-2008 03:12 PM
4x4 Kit Dale_Lakin Supporting Vendors Forum 3 08-07-2005 03:35 PM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome