pre-programmed ScangaugeII for 6.0L - Diesel Truck Forum - TheDieselGarage.com
Thread Details Posted by harry6.0, this thread has received 9 replies and been viewed 1549 times.

 
LinkBack Thread Tools Display Modes
post #1 of 10 (permalink) Old 03-12-2015, 05:52 AM Thread Starter
Senior Member
 
harry6.0's Avatar
 
Join Date: Dec 2008
Location: Spokane WA. area
Posts: 3,051
Points: 142,064
Thanks: 1,507
Thanked 990 Times in 755 Posts
pre-programmed ScangaugeII for 6.0L

I forgot to mention this awhile back, and some of you may know this already, but BPD sells new ScanGaugeII's that are already pre-programmed for the 6.0L PowerStroke. This is nice, because even after all the ones I have programmed for people, it's still a pain. This is the way to go if your in need of one, actually every 6.0L owner should have one.
http://www.bulletproofdiesel.com/Sca...m#ReviewHeader

Harry

Jan 03' built 6.0/F250cc4wd trqsft/SCT-tuned by KEM-Performance/Garrett Powermax vg-turbo/blue spring mod/gauges=egt+boost+fuel+SG2/exhaust/airaid intake/DR 4.5 lift/dual bilsteins/315's/greasable ball joints/powerstop/smittybuilt/kc lights/high idle mod/roll-n-lock/Mobil Delvac1 ESP 5W40 with (Archoil AR9100 in the oil) and (AR6200 in the fuel)
harry6.0 is offline  
The Following 2 Users Say Thank You to harry6.0 For this addition to TDG:
bismic (03-20-2015), Weld engineer (03-13-2015)
Sponsored Links
Advertisement
 
post #2 of 10 (permalink) Old 03-12-2015, 10:19 PM
Junior Member
 
Join Date: Dec 2010
Posts: 721
Points: 51,373
Thanks: 51
Thanked 140 Times in 115 Posts
Who has the latest updated program table?
lenzhotrod is offline  
post #3 of 10 (permalink) Old 03-13-2015, 03:13 AM
Senior Member
 
Weld engineer's Avatar
 
Join Date: Apr 2012
Location: Middle of the Mitten, MI
Posts: 1,324
Points: 48,513
Thanks: 866
Thanked 506 Times in 401 Posts
Garage
Is there a way to complete reset it I want to redo my x gauges order and just want to clear it like when it was new.

Early 2004 F-250 4x4 CC 6.0


2nd owner, ARP studs 1 at a time, Some parts missing in the exhaust path, BD intercooler hoses, Blue spring, MC filters, Sinister coolant filter, Exhaust manifold gaskets, WARN lockouts, Gold coolant, zoodad mod, autometer boost gauge, high idle mod, Scangauge 2, SCT X3 tuned from KEM, autometer fuel pressure gauge, Archoil 6200 in the fuel, FICM by Ed w/ATLAS40, autometer pyro gauge,'08 Alum Rear Diff cover, 5w-40 Rotella T6 w/ Archoil 9100 in it, zert in the slip joint, harpooned fuel tank, 6.4 banjos


Not a diesel mechanic in real life but I play one on the Internet
Weld engineer is offline  
post #4 of 10 (permalink) Old 03-14-2015, 02:52 PM Thread Starter
Senior Member
Threadstarter
 
harry6.0's Avatar
 
Join Date: Dec 2008
Location: Spokane WA. area
Posts: 3,051
Points: 142,064
Thanks: 1,507
Thanked 990 Times in 755 Posts
Quote:
Originally Posted by Weld engineer View Post
Is there a way to complete reset it I want to redo my x gauges order and just want to clear it like when it was new.
I've never tried it on the ScangaugeII, but I think if you select "default" on the menu settings it may erase all your coding.

This is how it works on our laptops at work when were programming or coding a vehicle control module, or programming a control module menu options, it will give an option saying reset to default settings or reset to factory settings, which erases everything that was previously selected or programmed.

I would probably give Linear Logic a call first, they are very responsive to any questions.

Harry

Jan 03' built 6.0/F250cc4wd trqsft/SCT-tuned by KEM-Performance/Garrett Powermax vg-turbo/blue spring mod/gauges=egt+boost+fuel+SG2/exhaust/airaid intake/DR 4.5 lift/dual bilsteins/315's/greasable ball joints/powerstop/smittybuilt/kc lights/high idle mod/roll-n-lock/Mobil Delvac1 ESP 5W40 with (Archoil AR9100 in the oil) and (AR6200 in the fuel)
harry6.0 is offline  
The Following User Says Thank You to harry6.0 For this addition to TDG:
Weld engineer (03-15-2015)
post #5 of 10 (permalink) Old 03-14-2015, 02:57 PM Thread Starter
Senior Member
Threadstarter
 
harry6.0's Avatar
 
Join Date: Dec 2008
Location: Spokane WA. area
Posts: 3,051
Points: 142,064
Thanks: 1,507
Thanked 990 Times in 755 Posts
Quote:
Originally Posted by lenzhotrod View Post
Who has the latest updated program table?
I know there were some new options available that weren't on the normal X-gauge list for our trucks, but I can't remember either where to find it.

I also wonder if it requires a software-firmware upgrade to make it possible,
http://www.scangauge.com/support/upgrade/

I'll keep my eyes open for any info on this.

Harry

Jan 03' built 6.0/F250cc4wd trqsft/SCT-tuned by KEM-Performance/Garrett Powermax vg-turbo/blue spring mod/gauges=egt+boost+fuel+SG2/exhaust/airaid intake/DR 4.5 lift/dual bilsteins/315's/greasable ball joints/powerstop/smittybuilt/kc lights/high idle mod/roll-n-lock/Mobil Delvac1 ESP 5W40 with (Archoil AR9100 in the oil) and (AR6200 in the fuel)
harry6.0 is offline  
The Following User Says Thank You to harry6.0 For this addition to TDG:
lenzhotrod (03-14-2015)
post #6 of 10 (permalink) Old 03-16-2015, 08:28 AM
Junior Member
 
Join Date: Feb 2012
Posts: 154
Points: 24,570
Thanks: 57
Thanked 126 Times in 79 Posts
So, which PIDs do they program into their SGII?

Also, is there something particular anyone is looking for for PIDs?
amdriven2liv is offline  
post #7 of 10 (permalink) Old 03-16-2015, 07:22 PM
Junior Member
 
Join Date: Dec 2010
Posts: 721
Points: 51,373
Thanks: 51
Thanked 140 Times in 115 Posts
I was looking for a updated compete list. I had one until my computer crashed.
lenzhotrod is offline  
post #8 of 10 (permalink) Old 03-16-2015, 09:42 PM
Junior Member
 
Join Date: Feb 2012
Posts: 154
Points: 24,570
Thanks: 57
Thanked 126 Times in 79 Posts
Would these help?

Edit: I haven't seen the injector codes work, both on off and misfires.
Attached Files
File Type: pdf 2003-2007 Ford Super Duty 6.0L PSD ScanGauge II XGauge Codes V5.pdf (517.3 KB, 111 views)
File Type: pdf Engine Operating Values - updated Feb 2015.pdf (113.0 KB, 56 views)
amdriven2liv is offline  
The Following 4 Users Say Thank You to amdriven2liv For this addition to TDG:
bismic (03-20-2015), harry6.0 (03-17-2015), lenzhotrod (03-17-2015), Weld engineer (03-17-2015)
post #9 of 10 (permalink) Old 03-17-2015, 04:22 AM Thread Starter
Senior Member
Threadstarter
 
harry6.0's Avatar
 
Join Date: Dec 2008
Location: Spokane WA. area
Posts: 3,051
Points: 142,064
Thanks: 1,507
Thanked 990 Times in 755 Posts
This is a great list of additions for the ScanGauge, I especially like the cumulative misfires for cyl 1-8 and injector timing, actually I like the whole list.

Thanks a million for posting this Amdriven!

Harry

Jan 03' built 6.0/F250cc4wd trqsft/SCT-tuned by KEM-Performance/Garrett Powermax vg-turbo/blue spring mod/gauges=egt+boost+fuel+SG2/exhaust/airaid intake/DR 4.5 lift/dual bilsteins/315's/greasable ball joints/powerstop/smittybuilt/kc lights/high idle mod/roll-n-lock/Mobil Delvac1 ESP 5W40 with (Archoil AR9100 in the oil) and (AR6200 in the fuel)
harry6.0 is offline  
post #10 of 10 (permalink) Old 03-17-2015, 05:47 AM
Junior Member
 
Join Date: Feb 2012
Posts: 154
Points: 24,570
Thanks: 57
Thanked 126 Times in 79 Posts
Quote:
Originally Posted by harry6.0 View Post
This is a great list of additions for the ScanGauge, I especially like the cumulative misfires for cyl 1-8 and injector timing, actually I like the whole list.

Thanks a million for posting this Amdriven!

Harry
I have not seen the misfires work. Never got them to work for me.
amdriven2liv is offline  
The Following User Says Thank You to amdriven2liv For this addition to TDG:
harry6.0 (03-17-2015)
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Diesel Truck Forum - TheDieselGarage.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
ScanGaugeII neeltburn Whats Been Sold 0 11-25-2012 05:54 PM
PRE LUBER/PRE OILER SYSTEM MRBOHN23 5.9L Cummins (2003-2007.5) 7 05-21-2010 06:11 PM
ID programmed FICM International350 Ford Parts 20 05-19-2010 02:11 AM
sct programmed right destructive 2003-2007 6.0L Power Stroke 3 11-30-2007 02:46 AM
How to tell if my truck is programmed? imported_diesel_ 2003-2007 6.0 Tuner Forum 12 06-26-2007 08:50 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome