sct vs edge platium - Diesel Truck Forum - TheDieselGarage.com
Thread Details Posted by redneck6.0l, this thread has received 8 replies and been viewed 1097 times.

 
LinkBack Thread Tools Display Modes
post #1 of 9 (permalink) Old 08-07-2006, 02:16 AM Thread Starter
powerstrokes rule
 
Join Date: Feb 2006
Location: fort mcmurray AB Canada
Posts: 841
Points: 30,225
Thanks: 0
Thanked 70 Times in 47 Posts
sct vs edge platium

sct laid down 382, edge laid down 392, banks 360, diaplo 375, the other edge platium laid 380, these are hp numbers, what do you guys think about this, sct ran the fastest down the track and shifted the best.

2003 F-350 crew cab 4X4 6 leaker
a few mods

[email protected]
redneck6.0l is offline  
Sponsored Links
Advertisement
 
post #2 of 9 (permalink) Old 08-07-2006, 01:27 PM
 
Join Date: Mar 2006
Posts: 150
Points: 546
Thanks: 0
Thanked 0 Times in 0 Posts
Different strokes for different folks.

Edge offers much more flexibility. SCT offers better transmission programming.

Conclusion is that you probably can't go wrong with either approach.
Redneckmba is offline  
post #3 of 9 (permalink) Old 08-07-2006, 01:45 PM
Old Geezer-TDG Mafia #19
 
LargeCar's Avatar
 
Join Date: Dec 2008
Location: Bridge Creek, OK (Tornado Ally)
Posts: 4,396
Points: 62,163
Thanks: 70
Thanked 187 Times in 78 Posts


Images: 9
Did the Platinum have the unlock code?

LargeCar :mafia

LargeCar

Mafia # 19 The Dually Club # 19

If a country does not remember and honor its fallen heroes of the past, in the future that country will not be honored or remembered.

G.R. Wemmer

A veteran is someone who, at one point in his/her life wrote a blank check made payable to 'The United States of America' for an amount of 'up to and including their life.' That is Honor, and there are way too many people in this country who no longer understand it.
LargeCar is offline  
post #4 of 9 (permalink) Old 08-07-2006, 05:00 PM Thread Starter
powerstrokes rule
Threadstarter
 
Join Date: Feb 2006
Location: fort mcmurray AB Canada
Posts: 841
Points: 30,225
Thanks: 0
Thanked 70 Times in 47 Posts
yes the edge platium was unlocked, the edge on number 5 only laid 370, so there is a big difference between level 5 and 6

2003 F-350 crew cab 4X4 6 leaker
a few mods

[email protected]
redneck6.0l is offline  
post #5 of 9 (permalink) Old 08-07-2006, 05:43 PM
 
Join Date: Jul 2005
Posts: 2,836
Points: 27,295
Thanks: 0
Thanked 1 Time in 1 Post
The unasked question is what and whose SCT tune....cause they are not all created equal?
jschall is offline  
post #6 of 9 (permalink) Old 08-07-2006, 06:24 PM
Senior Member
 
InnovativeDiesel's Avatar
 
Join Date: Dec 2008
Posts: 1,045
Points: 61,809
Thanks: 0
Thanked 62 Times in 31 Posts
Images: 1
The HP curve and torque curve are the most important. It's what's under the curve that get's you down the truck. Also, I bet the SCT already had the convertor locked and the other trucks locked during the pull. That will change the numbers significantly.

The truck that makes it through the 1320 the quickest is definitely putting the power down more effectively.
InnovativeDiesel is offline  
post #7 of 9 (permalink) Old 08-07-2006, 07:05 PM Thread Starter
powerstrokes rule
Threadstarter
 
Join Date: Feb 2006
Location: fort mcmurray AB Canada
Posts: 841
Points: 30,225
Thanks: 0
Thanked 70 Times in 47 Posts
thats what i forgot to say, the edge spiked that hp for 300 rpm, the sct held that hp for 1500 rpm, the torque curve on the sct was flat from 2300 to 4000, the edge hit max torque at 2300 then fell off very quickly,

2003 F-350 crew cab 4X4 6 leaker
a few mods

[email protected]
redneck6.0l is offline  
post #8 of 9 (permalink) Old 08-07-2006, 07:13 PM
 
Join Date: Jul 2005
Posts: 598
Points: 21,849
Thanks: 0
Thanked 0 Times in 0 Posts
Quote:
Originally Posted by jschall
The unasked question is what and whose SCT tune....cause they are not all created equal?
That is exactly what I am thinking..Was it off the shelf or custom?..
bagstroke is offline  
post #9 of 9 (permalink) Old 08-16-2006, 12:02 PM
Junior Member
 
Jassman's Avatar
 
Join Date: Aug 2005
Posts: 187
Points: 21,860
Thanks: 3
Thanked 31 Times in 13 Posts
Garage
I own both a custom tune from Innovative on a 06 F250. and a Edge Plat. on the other, that has now level 6. Both trucks are identicle. I love the Edge for its versatility, but dont care for the flair shifts. The SCT from Eric is awesome, shifts every time. When we ride side by side up to about 90-95 my SCT truck is always 1 1/2 truck lengths ahead. I believe slightly better torque curve and the ability to shift crisper. Hopes this helps. Jeff

2011 F350 LWB CC 3.55's GPS Lariat personal truck
2011 F250 SWB CC 3.55's Lariat delivery truck w/over 100k as of 12/11
2011 GMC 2500HD CC 3.73's partners truck
2012 Dodge 3500 dually 6.7 HO car hauler

2010 F150 FX4 5.4 3.73's sold to employee

2008 LWB CC 6.4 dually..3.73 and all the options...No mods at this time....sold to NJ friend
Jassman is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Diesel Truck Forum - TheDieselGarage.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome