custom HPOP lines? - Diesel Truck Forum - TheDieselGarage.com
Thread Details Posted by SICKS-O, this thread has received 8 replies and been viewed 4421 times.

 
LinkBack Thread Tools Display Modes
post #1 of 9 (permalink) Old 08-13-2007, 12:40 AM Thread Starter
Slow 6.0
 
Join Date: Dec 2008
Location: Salem, NH
Posts: 1,554
Points: 42,523
Thanks: 30
Thanked 59 Times in 46 Posts
custom HPOP lines?

well last night my truck broke down, luckily in front of my friends house the drivers side HPOP line blew out of the fitting due to a broken snap ring, im guessing the new lines/fittings are expensive from ford so i was considering having some hydraulic lines made are the thread series used for the fittings common?

2006 F350 XLT 4x4
ARP Studs, Blocked EGR Cooler, MBRP 304SS Cool Duals, 03 Turbo, Coolant Filter Kit, PCM Flashed Back & Innovative Extreme Tunes - 13.3 @ 99
SICKS-O is offline  
Sponsored Links
Advertisement
 
post #2 of 9 (permalink) Old 08-13-2007, 08:12 AM
 
Join Date: Dec 2008
Posts: 1,870
Points: 12,001
Thanks: 0
Thanked 1 Time in 1 Post
It's #5 boss on the engine side, #6 boss on the pump side.

I would recommend against having custom lines made unless your 100% positive you know what you're getting, and the shop knows what the hell they're doing.

The lines from Ford are good. Keep the loom on them so they don't destroy other things and themselves.
gregrob is offline  
post #3 of 9 (permalink) Old 08-14-2007, 07:34 PM
Senior Member
 
Join Date: Mar 2007
Posts: 568
Points: 45,013
Thanks: 0
Thanked 5 Times in 3 Posts
Does anyone have a part number for the HPOP lines? I think I might have sprung a leak from one. Hoping a replacing the Oring will be enough - but if not, part number would be greatly appreciated...

Sam

The Trash Truck
96 CC F350 SRW - Built for SVO and mileage
Go Green - HotFox, Dual Heated Dahl 100s, Fuel Filter Coolant Wrap, ArcticFox
Go Fast - Hybrids, H2E, 6.0 IC, Fuelab, BTS 144.2/291.5 uncorrected


thanx go to
Rockin-S-Performance - Install, tech support, and advice
Diesel Innovations - Killer Deal on Parts
Tony Wildman/SWAMPS - Tuning
genie144 is offline  
post #4 of 9 (permalink) Old 08-15-2007, 08:24 AM
Senior Member
 
Join Date: May 2005
Posts: 1,921
Points: 14,581
Thanks: 0
Thanked 2 Times in 2 Posts
Send a message via Yahoo to gtspowerstroke
Aeroquip is who makes the lines for IH. If you do not have the right stuff it will be a bad thing. There have been quite a few different hoses out there that have burst from not having the correct ratings. Seems most everything I've found either has the pressure rating but not high enough temp rating or has a high enough temp rating but not high enough pressure rating. I did find one shop locally that carried Aeroquip and could get the parts to do it but the 90° ends aren't cheap at all. Your most likely best off going to Ford or IH to get new lines.

'96 F-250 Extended Cab, GT'S injectors, GT'S intercooler install kit, custom turbo kit with a little HX40, Swamp's BIGEST oil.
466 on #2 only
739 with NČO

13.544 in 1/4 mi!

"If you think you can do a thing or think you can't do a thing, you're right." Henry Ford

Yeah I can keep up!:Thumbup:
gtspowerstroke is offline  
post #5 of 9 (permalink) Old 08-15-2007, 03:12 PM
Senior Member
 
Join Date: Mar 2007
Posts: 568
Points: 45,013
Thanks: 0
Thanked 5 Times in 3 Posts
Anyone have a part number? I couldn't seem to find a part number for just the lines.

Sam

The Trash Truck
96 CC F350 SRW - Built for SVO and mileage
Go Green - HotFox, Dual Heated Dahl 100s, Fuel Filter Coolant Wrap, ArcticFox
Go Fast - Hybrids, H2E, 6.0 IC, Fuelab, BTS 144.2/291.5 uncorrected


thanx go to
Rockin-S-Performance - Install, tech support, and advice
Diesel Innovations - Killer Deal on Parts
Tony Wildman/SWAMPS - Tuning
genie144 is offline  
post #6 of 9 (permalink) Old 08-15-2007, 04:35 PM
Newbie
 
Join Date: Dec 2008
Posts: 128
Points: 21,088
Thanks: 40
Thanked 23 Times in 20 Posts
which side is it? For some reason they are different lines for the drivers side vs the passenger side.. Bob at powerstrokeshop.com has great prices if you can wait on getting it shipped. Otherwise about $120 from Ferd

2002 Ford F350 Crewcab 4x4 7.3 PSD, powered by a 2004 5.9L Cummins

820 HP on 05/19/12
Deputydog is offline  
post #7 of 9 (permalink) Old 08-15-2007, 05:19 PM
Senior Member
 
Join Date: Mar 2007
Posts: 568
Points: 45,013
Thanks: 0
Thanked 5 Times in 3 Posts
I actually am interested in getting the part number for both sides for future reference. I tracked my oil leak and it doesn't appear to be from the lines but from the peep whole on the top of the HPOP resevoir.

Sam

The Trash Truck
96 CC F350 SRW - Built for SVO and mileage
Go Green - HotFox, Dual Heated Dahl 100s, Fuel Filter Coolant Wrap, ArcticFox
Go Fast - Hybrids, H2E, 6.0 IC, Fuelab, BTS 144.2/291.5 uncorrected


thanx go to
Rockin-S-Performance - Install, tech support, and advice
Diesel Innovations - Killer Deal on Parts
Tony Wildman/SWAMPS - Tuning
genie144 is offline  
post #8 of 9 (permalink) Old 08-15-2007, 05:39 PM
Newbie
 
Join Date: Dec 2008
Posts: 128
Points: 21,088
Thanks: 40
Thanked 23 Times in 20 Posts
These should be the part numbers you need:

LH: F81Z-9A332-AA
RH: F81Z-9J323-AA

Here is a link to Dieselman's website with all kinds of part number for our trucks..

http://www.intellidog.com/dieselmann/parts.htm

2002 Ford F350 Crewcab 4x4 7.3 PSD, powered by a 2004 5.9L Cummins

820 HP on 05/19/12
Deputydog is offline  
post #9 of 9 (permalink) Old 08-16-2007, 07:57 PM Thread Starter
Slow 6.0
Threadstarter
 
Join Date: Dec 2008
Location: Salem, NH
Posts: 1,554
Points: 42,523
Thanks: 30
Thanked 59 Times in 46 Posts
welll after spending a lot of time taking my truck apart to clean up the huge oil mess, i degreased and scraped the lifter valley down to clean bare metal and painted it, took the turbo apart cleaned and painted that to, put it all back together today, drove it 100 feet and the line popped! looks like the braided part was a little frayed or somethin, so now i have oil all over everything i just cleand/painted, what a freakin mess and a huge kick in the nuts after trying to make it all look good. time to buy a new line, maybe even two!

2006 F350 XLT 4x4
ARP Studs, Blocked EGR Cooler, MBRP 304SS Cool Duals, 03 Turbo, Coolant Filter Kit, PCM Flashed Back & Innovative Extreme Tunes - 13.3 @ 99
SICKS-O is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Diesel Truck Forum - TheDieselGarage.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome