Join Date: Feb 2007
Thanked 0 Times in 0 Posts
Newbie Exhaust lessons learned
Got my new 4in Magnaflow delivered and installed today. Thanks GOS
Make sure you have a 7/16 deep socket for the downpipe clamp. It's a bit of a pain to get off. A 1/4 inch drive would probably work best, especially if you have normal sized hands.
Inventory all parts, I had everything except the nuts for the exhaust clamps. (Thanks again GOS
Performance)(Home Depot Run).
Get help to align and put the clamp on the downpipe.
Once everything is mounted, but not tightened. Tighten the rearmost clamp a bit first, then adjust everything and tighten.
Just my 2 cents.