Intake which one - Diesel Truck Forum - TheDieselGarage.com
Thread Details Posted by tooty, this thread has received 10 replies and been viewed 1477 times.

Reply
 
LinkBack Thread Tools Display Modes
post #1 of 11 (permalink) Old 11-11-2009, 12:22 AM Thread Starter
Junior Member
 
tooty's Avatar
 
Join Date: Feb 2009
Posts: 47
Points: 2,553
Thanks: 2
Thanked 1 Time in 1 Post
Intake which one

Ok,I've been looking at different cold air intakes.I have a 2002 7.3.Evolution programer set on 60 hp tow mode (Yeah,Yeah I know but that's what's in it for now).4" downtube and 4 the rest of the way.AFE stage 1 54-10191 or AFE stage 2 51-10192 or then there is one from BD diesel performance X take airbox.What one is good for me?.I'm going to play with the 80 and 100 hp settings to see what gives the better milage for the bang.
tooty is offline  
Sponsored Links
Advertisement
 
post #2 of 11 (permalink) Old 11-11-2009, 12:55 AM
Senior Member
 
powerstroke2003's Avatar
 
Join Date: Jul 2007
Location: Chilhowie VA
Posts: 326
Points: 30,612
Thanks: 75
Thanked 12 Times in 12 Posts
A DIY intake is the best bang for the buck and it will flow about as good if not better than of the others.

I'm Zac

2003 F-250 6.0 Powerstroke, Torqueshift, 4x4
Crew Cab, Shortbed, Dark Red Exterior; Tan Interior; H-11 Headstuds; Tuned by Innovative Diesel; MBRP down pipe straight into a 6 inch Grand Rock miter stack; Airaid Intake; Isspro Trans temp, Fuel pressure, Boost, Pyro gauges; EGR Cooler Deleted; Pro Comp 3in leveling kit and F-350 blocks out back; Eagle Alloy 114 wraped in Nitto Terra Grapplers; Ranchhand brushguard; Custom Traction Bars; Recon Smoke Cab Light and Third Brake Light;Pioneer CD Player and XM radio; and a "THE DIESEL GARAGE" sticker in the back window.

Black Betty: 1981 Jeep CJ7 258 I-6, 4 spd, Headman Header, Comp Cams MSD ignition, Motorcraft 2100 Carb, 2in of lift, 30in Swampers, Lincoln Locked rear.

Scrappy: 1975 Jeep CJ5 258 I-6, 3 spd,Headman Header, Motorcraft 2100 Carb, Full MSD ignition, Stretched 14 inches, 4 inches of lift, 33 inch tires, Lincoln Locker rear


BOMB Squad #15
Singles Club #136
American Club #17
Riding Dirty Club #25


A big thanks to Aaron at Smoking Guns Performance
powerstroke2003 is offline  
post #3 of 11 (permalink) Old 11-11-2009, 01:15 AM
 
Join Date: Jan 2008
Posts: 10
Points: 230
Thanks: 0
Thanked 0 Times in 0 Posts
DIY. Got mine at. www.fleetfilter.com
njjeep is offline  
post #4 of 11 (permalink) Old 11-11-2009, 01:46 AM Thread Starter
Junior Member
Threadstarter
 
tooty's Avatar
 
Join Date: Feb 2009
Posts: 47
Points: 2,553
Thanks: 2
Thanked 1 Time in 1 Post
DIY I"ll check that out .What model #?Do they have the whole intake system?
tooty is offline  
post #5 of 11 (permalink) Old 11-11-2009, 04:47 AM
Senior Member
 
AKCCF350's Avatar
 
Join Date: Dec 2007
Location: Eagle River, AK
Posts: 255
Points: 27,527
Thanks: 3
Thanked 6 Times in 5 Posts
Quote:
Originally Posted by tooty View Post
DIY I"ll check that out .What model #?Do they have the whole intake system?
DYI is not the brand, it stands for Do It Yourself. If you do a search on this site you'll find a few to choose from to get ideas.

Here's one:
https://www.thedieselgarage.com/forum...ghlight=intake

And one more:
https://www.thedieselgarage.com/forum...ghlight=intake

Hope this helps.

97 F350 CC LB 4x4 7.3L
Tymar Intake, DP Tuner F-5, Straight Exhaust, 37" Cooper STT II,
SuperDuty Quad-Pod

Parts sitting waiting to install: Moonvisor, 1.0 Exh. Housing, White Faced Dash Gauges, Air Horns (still need compressor)

All Mods on hold as of 2-1-09. Building a rig for my dad.......

Last edited by AKCCF350; 11-11-2009 at 04:50 AM.
AKCCF350 is offline  
post #6 of 11 (permalink) Old 11-11-2009, 05:07 AM
Senior Member
 
Join Date: Dec 2008
Posts: 862
Points: 22,473
Thanks: 2
Thanked 112 Times in 85 Posts
I ran the DIY setup for several years and never had a problem with it. For the money, it works great.

The only downside to it is that it's loud. If you do a lot of towing, or generally don't like a lot of noise, it can get old in a hurry. If you love the sound of your diesel, you'll love this intake.

I currently run the AFE Stage II in my truck now. Performance-wise, I can't tell a difference between the AFE and the DIY. It looks nicer under the hood than the DIY, and with the shroud, it cuts the noise down a bit. Still not as quiet as stock, but quiet enough for my tastes.
Pocket is offline  
post #7 of 11 (permalink) Old 11-11-2009, 11:55 AM
Senior Member
 
dondiesel444's Avatar
 
Join Date: Dec 2008
Location: back in cold NY
Posts: 838
Points: 91,716
Thanks: 15
Thanked 20 Times in 19 Posts
Napa 6637 filter and a short section of 4" exhaust pipe, can't beat the price, sound and performance!!!

I can't see spending $300 for an intake when I have about $30 in mine and it does the same thing!

NEW2001 Western Star 4964FX double frame tri-axle dump truck, 6NZ CAT Power, 10 speed, Sirius radio.

SOLD1997 Western Star 4964FX double frame tri-axle dump truck, 3406C Cat Power, 8LL, 46K rears on Chalmers, lots of lights, Sirius radio

2001 F-250 7.3 PSD crew cab 4X4 Lariet, DP Tuner ECM, sonnax/tri springs, 3" lift, 305/70R16' BFG's on 16x8 DC-2 wheels, 6637 air filter, straight piped, 04 headlights and turn signals.
dondiesel444 is offline  
post #8 of 11 (permalink) Old 11-11-2009, 06:04 PM
Junior Member
 
balz out's Avatar
 
Join Date: May 2009
Location: jefferson, new jersey
Posts: 296
Points: 39,308
Thanks: 10
Thanked 23 Times in 23 Posts
do the diy and get a pre-filter from www.magicsmokeperformance.com its around 30 bucks i think and is a good insurance for a 55 dollar filter and looks good under hood

2000 f350 7.3 ext cab 6speed- 4inch dp, 5inch straight pipe, ts 6 pos chip. stock 140 100 75 50 high idle, zoodad, fpr shimmed, 6637 intake, 5inch lift, foil delete, beans idm, stage one injectors....r.i.p was fun when it lasted

94 mack rd e7350 mack 12speed roll bed
balz out is offline  
post #9 of 11 (permalink) Old 11-12-2009, 01:15 AM Thread Starter
Junior Member
Threadstarter
 
tooty's Avatar
 
Join Date: Feb 2009
Posts: 47
Points: 2,553
Thanks: 2
Thanked 1 Time in 1 Post
I figured the DIY bit after I posted.I'm getting a little slow in the bean.Looks real easy to make up something.I love my screaming,howling turbo.
tooty is offline  
post #10 of 11 (permalink) Old 11-14-2009, 12:14 AM
Senior Member
 
Diezel Dawg's Avatar
 
Join Date: Dec 2008
Location: Cheney, WA
Posts: 459
Points: 25,092
Thanks: 2
Thanked 21 Times in 17 Posts
I bought my Intake from TYMAR Performance. I had an AFE Stage 2, and switched to the TYMAR, and love how it is set up and how it allow my turbo to sing. The filter from Dale is a Donaldson and costs half of what the 6637s run.

Ken
99.5 7.3L PSD 4x4
GTP38R BB TURBO
Casserly 250cc Hybrid injectors
BTS Trans W/ 6.0 Trans cooler
Live Tuned by Jody
TYMAR Intake/Coolant Filter
463hp and 912 tq 6 Feb 10
491hp 944tq 28 Aug 10
Future mods-- AirDog/ITP Reg Ret. Fuel sys. w/fuel bowl del, Terminator Big Oil,
PNWFDE#2
Diezel Dawg is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Diesel Truck Forum - TheDieselGarage.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
AFE Air Intake MstHillFarms 2008-2010 6.4L Power Stroke 1 02-07-2008 02:28 AM
intake saleen6687 5.9L Cummins (2003-2007.5) 3 02-06-2008 04:39 AM
diy intake platinum01 1994-2003 7.3L Power Stroke 13 12-31-2007 05:26 AM
afe intake youngPSD General Ford Truck and Excursion 16 11-27-2006 07:27 PM
intake help!!!!!!!!!!! imported_coalfed 5.9L Cummins 12 Valve (1994-1998.5) 5 11-22-2006 10:49 PM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome