Join Date: Aug 2007
Thanked 0 Times in 0 Posts
Is this right
I donít know what to expect from my setup. I have ATS
factory turbo but not install on top of the engine. It is under the bus with the two exhausts pipe from the manifolds running into it. And I have just a short 4Ē pipe on the output of the turbo at this time.
The intake is is 4Ē to the turbo and 3Ē boost piping to a 12x31x3 intercooler.
I started it up today setting in the garage with it running I could see the turbo turning but there was not much wine from the turbo.
I was expecting setting in the garage 300*+ on the pyrometer but it was 200* and some pressure on the boost gauge I had 0 but got a rise of 1 when I reb it up and let off and at that point Iíll get 1PSI.
Is this right or not? The boost is what I'm questioning the most.
Project--1992 International School Bus Model 3700, IDI 7.3, Transmission Allison Model AT545, 94 IDI turbo, Fuel SVO