Rough Country lifts - Diesel Truck Forum - TheDieselGarage.com
Thread Details Posted by birddog55, this thread has received 11 replies and been viewed 709 times.

Reply
 
LinkBack Thread Tools Display Modes
post #1 of 12 (permalink) Old 02-16-2006, 11:04 AM Thread Starter
Member
 
Join Date: Dec 2008
Posts: 78
Points: 13,071
Thanks: 0
Thanked 0 Times in 0 Posts
Rough Country lifts

Does anybody know much about the 3" lifts for the 05 trucks? Where did you buy and what was the cost?
birddog55 is offline  
Sponsored Links
Advertisement
 
post #2 of 12 (permalink) Old 02-16-2006, 01:40 PM
Senior Member
 
Join Date: Dec 2005
Posts: 4,318
Points: 58,517
Thanks: 2
Thanked 18 Times in 4 Posts
I had one. They are right about 400 bucks. I removed mine in about 3 months time.
NMU98 is offline  
post #3 of 12 (permalink) Old 02-16-2006, 01:42 PM
Senior Member
 
Join Date: Jul 2005
Posts: 2,691
Points: 28,592
Thanks: 3
Thanked 2 Times in 2 Posts
Quote:
Originally Posted by ISurvivedNMU
I had one. They are right about 400 bucks. I removed mine in about 3 months time.

Why :shrug:
nummit is offline  
post #4 of 12 (permalink) Old 02-16-2006, 04:37 PM
diesel weenie
 
Join Date: Aug 2005
Posts: 113
Points: 1,831
Thanks: 0
Thanked 3 Times in 3 Posts
Probably because it was as low quality as is commonly beleived.
monkeyboy is offline  
post #5 of 12 (permalink) Old 02-16-2006, 04:40 PM
Senior Member
 
Join Date: Dec 2005
Posts: 4,318
Points: 58,517
Thanks: 2
Thanked 18 Times in 4 Posts
when looking at lifts, you need to think of how you want your truck to drive afterwards. When everyone else adjusts the caster, and one company does not, it cause they chinced out.
NMU98 is offline  
post #6 of 12 (permalink) Old 02-16-2006, 04:43 PM
Senior Member
 
Join Date: Jul 2005
Posts: 2,691
Points: 28,592
Thanks: 3
Thanked 2 Times in 2 Posts
Quote:
Originally Posted by ISurvivedNMU
when looking at lifts, you need to think of how you want your truck to drive afterwards. When everyone else adjusts the caster, and one company does not, it cause they chinced out.

I hear ya'
That's why I went with DR
nummit is offline  
post #7 of 12 (permalink) Old 02-16-2006, 05:03 PM Thread Starter
Member
Threadstarter
 
Join Date: Dec 2008
Posts: 78
Points: 13,071
Thanks: 0
Thanked 0 Times in 0 Posts
I survived NMU do you still have the lift and do ya want to sell it?
birddog55 is offline  
post #8 of 12 (permalink) Old 02-16-2006, 08:11 PM
 
Join Date: May 2005
Posts: 596
Points: 1,147
Thanks: 0
Thanked 0 Times in 0 Posts
Quote:
Originally Posted by nummit
I hear ya'
That's why I went with DR

bingo, if you're gonna do it, do it right:Thumbup:
Swany is offline  
post #9 of 12 (permalink) Old 02-17-2006, 12:21 AM
Senior Member
 
Join Date: May 2005
Posts: 1,155
Points: 2,972
Thanks: 0
Thanked 0 Times in 0 Posts
Quote:
Originally Posted by Swany
bingo, if you're gonna do it, do it right:Thumbup:
agreed

05 f350 crew cab long bed, 10.5" rize, deaver rears, bilstein 5150s front and back, 38x15.50x18 **** cepek mud countrys, 18x9.5 pro comp 1023s clearcoated, 4.56s, pml diff covers, rize ladder bars, rize dual stabilzer with bilsteins, adj. trac bar, amp reasearch steps, doug tuned sct, airaid with zoodad, 5" straight pipe, fluidampr, welded egr, shimmed regulator, isspros, viair 480c with nathan p3, husky mats, marathon seat covers, uws toolbox, uws 100 gallon transfer tank w/15gpm pump, uws dog box

01 f150 supercrew, 33" mud grapplers, stock, for sale $13,000

05 brute force 750, snorkeled, lifted, 29.5x12 outlaws front and back, black type 7s, intake, hmf pipe, moose, asr tie rods

06 raptor 700se, 734cc, 10.75:1, cammed, intake, ported/polished, yoshi pipe w/ fmf header, power commander, 15t front, yfz shocks, 20" holeshots, soon to be 770 stroker...
mikeym is offline  
post #10 of 12 (permalink) Old 02-17-2006, 01:02 AM
Senior Member
 
UpstateDieselGuy's Avatar
 
Join Date: Dec 2008
Posts: 2,821
Points: 59,943
Thanks: 55
Thanked 120 Times in 116 Posts
I have their Leveling Kit in my '04 and love it. Maybe they cheaped out with the new Coil Sprung front end. Chris

I'm a little more country than that...

2011 F-350 Extended Cab Short Box Lariat

SOLD
2004 F350 Regular Cab Long Box XLT; FX4, 6.0L and TorqShift; Manual Transfer Case and Hubs; Dark Shadow Grey Metallic; Keyless Entry; Factory Idle Control; 8 1/2' Fisher MMII; Factory 18" Wheels painted black with 305/70R18 Mickey Thompson ATZ's in the summer and XL Steel Wheels painted Black with 285/75R16 ProComp A/T's in the Winter; Rough Country 2.5" Leveling Kit; Isspro Pyrometer, Boost, and Transmission Temperature Gauges in an Overhead Pod; SCT by Innovative Diesel; Innovative Moderate FICM Tune; ARP Head Studs; '03 Turbo screaming through a 4" Turbo Back 409 MBRP System with both Deletes and 6" Tip.
UpstateDieselGuy is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Diesel Truck Forum - TheDieselGarage.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome