Brakes Hanging Up - Diesel Truck Forum -
Thread Details Posted by bigbear3, this thread has received 1 replies and been viewed 1006 times.

LinkBack Thread Tools Display Modes
post #1 of 2 (permalink) Old 09-20-2012, 05:02 PM Thread Starter
Join Date: Apr 2007
Posts: 22
Points: 21,024
Thanks: 4
Thanked 0 Times in 0 Posts
Brakes Hanging Up

Hi all, I just went to get my 99 F250 from storage to get it ready for snow plow season and it seems like all the brakes are sticking. I know that the slide pins are the main culprit in the brakes hanging up so I did go through and regrease all of them. After I got about 5 miles down the road and a few stops later they all started to stick again. I have searched the forum and found that it could be other things like master cylinder, brake booster, or the rubber lines going to the calipers. What could be tested if it would be the brake booster or the master cylinder?? I'm at a loss and I don't just wanna throw parts at this thing.

bigbear3 is offline  
Sponsored Links
post #2 of 2 (permalink) Old 09-22-2012, 01:42 AM
Senior Member
harry6.0's Avatar
Join Date: Dec 2008
Location: Spokane WA. area
Posts: 3,051
Points: 142,362
Thanks: 1,507
Thanked 990 Times in 755 Posts
If all four, or just the two front, or two rear brakes are sticking, I would be looking at the master cylinder or hoses. If just one single brake is sticking, I would be looking at the brake hose or caliper. Since the truck has been sitting, try doing a good brake flush of the system first, but remember brake fluid is hygroscopic, which means it attracts and retains moisture, which can cause any internal metallic surfaces in the master cylinder or caliper to rust. Thats why it's a good practice to flush the brake fluid every two years, especially if you live in a snowy climate. The brake booster itself should not cause the brakes to stick.


Jan 03' built 6.0/F250cc4wd trqsft/SCT-tuned by KEM-Performance/Garrett Powermax vg-turbo/blue spring mod/gauges=egt+boost+fuel+SG2/exhaust/airaid intake/DR 4.5 lift/dual bilsteins/315's/greasable ball joints/powerstop/smittybuilt/kc lights/high idle mod/roll-n-lock/Mobil Delvac1 ESP 5W40 with (Archoil AR9100 in the oil) and (AR6200 in the fuel)
harry6.0 is offline  
The Following User Says Thank You to harry6.0 For this addition to TDG:
bigbear3 (09-25-2012)

Quick Reply

Register Now

In order to be able to post messages on the Diesel Truck Forum - forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
Front Right Brakes Hanging Up? DDT3406 Medium and Heavy Duty 4 05-04-2012 12:52 AM
Issue with hanging idle CDriver 2008-2010 6.4L Engine Tuner Forum 3 07-29-2009 04:32 PM
injecter hanging 700rmk 2008-2010 6.4L Power Stroke 4 04-06-2009 04:04 AM
auto hanging first gwhammy 1994-2003 7.3L Power Stroke 4 02-10-2008 08:17 PM
What Is Hanging From Your Mirror???? King of Obsolete Medium and Heavy Duty 17 09-21-2007 02:25 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome