Senior Member
Join Date: Dec 2008
Location: Shepherdsville, KY
Posts: 873
Points: 34,083
Thanks: 21
Thanked 16 Times in 16 Posts
| Page 1 of 2 | 1 | 2 |
|
|
LinkBack | Thread Tools | Display Modes |
Door Seal mod????
Can someone tell me what the stuff is that people are putting through the door seal to help seal it better? I hope to take care of it today. I have looked a few minutes on here for that modbut cant find it...any help is appreciated..thanks
1999 24v ext cab quad cab long bed Laramie 4x4 : 155k miles, straight piped, Edge Juice w/ Attitude, "Dr Evil" trans rated for 800hp with 2500 stall gear driven TC, airdog 100, 2" leveling kit 33" mastercrafts.
Avatar is before I bought it of course. new pic coming soon
SOLD: 2006 F250 6.0 EXT CAB SBSCT by DFUSER,INNOVATIVE,: 2003 turbo :4inch cool duals and 6inch tips: HP Intake elbow: ARP STUDS: Diprocol Boost, Pyro, Trans, Fuel Pressure guage in quad pod: Isspro EOT guage in dash bezel: HID 6000k Headlights:305/40r22 on ProComp Extreme black and aluminum wheels: 2008 Mirrors,Tailgate, taillights and bumper: Sir Michaels Roll Pan: Billet fuel and Oil Caps:Billet grille: Billet tow hooks:Kenwood Double Din: Acetoned badges:
| Sponsored Links | |||
|
Advertisement
|
|
||
Senior Member
Join Date: Dec 2008
Posts: 862
Points: 22,482
Thanks: 2
Thanked 112 Times in 85 Posts
3/8" latex tubing. You can pick that up at Lowes, or order some online. My crew cab used 56 feet to do all 4 doors. Your extended cab will use a bit less.
Senior Member
Threadstarter
Join Date: Dec 2008
Location: Shepherdsville, KY
Posts: 873
Points: 34,083
Thanks: 21
Thanked 16 Times in 16 Posts
Thanks a lot Pocket
1999 24v ext cab quad cab long bed Laramie 4x4 : 155k miles, straight piped, Edge Juice w/ Attitude, "Dr Evil" trans rated for 800hp with 2500 stall gear driven TC, airdog 100, 2" leveling kit 33" mastercrafts.
Avatar is before I bought it of course. new pic coming soon
SOLD: 2006 F250 6.0 EXT CAB SBSCT by DFUSER,INNOVATIVE,: 2003 turbo :4inch cool duals and 6inch tips: HP Intake elbow: ARP STUDS: Diprocol Boost, Pyro, Trans, Fuel Pressure guage in quad pod: Isspro EOT guage in dash bezel: HID 6000k Headlights:305/40r22 on ProComp Extreme black and aluminum wheels: 2008 Mirrors,Tailgate, taillights and bumper: Sir Michaels Roll Pan: Billet fuel and Oil Caps:Billet grille: Billet tow hooks:Kenwood Double Din: Acetoned badges:
TDG Single Club Member#14
Join Date: Jun 2007
Posts: 1,086
Points: 19,686
Thanks: 6
Thanked 16 Times in 14 Posts
Some people have used solid 3/8's foam cord it can be picked up at lowes and home depot
2003 F-250 6.0 liter crew cab lariat 4x4 short bed, S&B intake, MBRP 4" turbo back straight piped jones, SCT livewire,
: 2 jl audio 12W3V3's with jl audio 500/1, autometer sport comp gauges, 6.5 inch pro comp lift, 37x13.5 Super Swamper M16'shttp://s192.photobucket.com/albums/z319/big_rooster69/
Black Smoke Junkie
Join Date: Jun 2007
Posts: 356
Points: 29,713
Thanks: 0
Thanked 1 Time in 1 Post
How does this work exactly and what does it do? (obviously it seals the door but is it seriously better.)
Tyler
'03 CC 6.0, truxedo tonneau, cowl hood
Clarion in dash DVD, 10 in. Fosgate sub
4" Pipe w/ 6" tip
Tuned by Innovative
315 Pro Comp Xtreme All Terrains
SLAPS Member #166
'03 CC 6.0, truxedo tonneau, cowl hood
Clarion in dash DVD, 10 in. Fosgate sub
4" Pipe w/ 6" tip
Tuned by Innovative
315 Pro Comp Xtreme All Terrains
SLAPS Member #166
Member
Join Date: May 2007
Posts: 106
Points: 2,042
Thanks: 2
Thanked 2 Times in 2 Posts
why are you trying to seal the door better? are you get some wind noise or what? just wondering.
BG
BG
2002 Ford F250 7.3L Powerstroke, six speed manual, 3.73 gears, Total 05-07 front end conversion, 07 heated signal mirrors, HID headlights, Whelen hide-away strobe kit.
8" Full Traction Coil-over conversion kit and 8" DR plush ride rear springs.
King off-road racing coil-overs and reservoir shocks 38x15.5 Kumho MT KL-71 tires on 20x10 Incubus wheels
4" turbo back Banks monster exhaust with power elbow. AFE stage 2 intake.
********* and Mafia #90
Join Date: Jul 2007
Location: New Berlin, WI
Posts: 14,261
Points: 91,567
Thanks: 943
Thanked 1,333 Times in 985 Posts
My Truck
most vehicles on a very windy day will get some air threw the cracks ect and the noise is what sucks. This ensures they are sealed even tighter. kinda like plugging the pipe to the egr valve. just helps insure things will be ok for a bit longer.
Bill Carriveau OFFICIAL POO HAULER
http://www.myemoticons.com/images/chicken_dance.gif100K miles on 4/7/2010http://www.myemoticons.com/images/chicken_dance.gif
2005 F250 FX4 Supercab Shortbed
2005 F250 FX4 Supercab Shortbed
ARP studs, sct, Leveling kit,Airdog set at 62psi with no factory pump, leveling kit,5" stacks, under cab lights, Large in the way Fan shroud Removed, bed Lights being Re-did. Large Alternator(250amps)(130 amps was so 2003). On 3rd set of Hgs(soon to be 4th), 2nd set of heads, 2nd tubro, egr cooler, FICM and more. When i Turn the Key it does return a Favor, not always in MY Favor.
Da Rules..Here
http://i449.photobucket.com/albums/q...g?t=1249694332
Windows 7 Takes the WIN!
Windows 8 might take that Win
http://www.bcarriveau.com/
Dear Tequila:
We had a deal. You were supposed to make me sexier, smarter and a better dancer. But I saw the video. And I think we need to talk..
How you name your Thread is Important. Read Here
The TDG TOTQ
Windows 7 Takes the WIN!
Windows 8 might take that Win
http://www.bcarriveau.com/
Dear Tequila:
We had a deal. You were supposed to make me sexier, smarter and a better dancer. But I saw the video. And I think we need to talk..
How you name your Thread is Important. Read Here
The TDG TOTQ
Senior Member
Join Date: Dec 2008
Location: Powell Butte, OR
Posts: 812
Points: 16,367
Thanks: 3
Thanked 31 Times in 28 Posts
how do you mount the tubing?
{95 F250 Powerstroke XLT} 5 spd, Wildman 6 pos. chip, custom IC, ADs, AFE stage 2 intake, 3" down pipe to custom 5in stack. EBPV break, shimed FPR, idm mod by mattymx, CCV mod, Leveling Kit, diprocol egt and boost guages.
********* and Mafia #90
Join Date: Jul 2007
Location: New Berlin, WI
Posts: 14,261
Points: 91,567
Thanks: 943
Thanked 1,333 Times in 985 Posts
you lube it up real good and use something of your choice to pull it threw the original seal, remove the seal lay it out lube up tube and pull tube threw. done.
Bill Carriveau OFFICIAL POO HAULER
http://www.myemoticons.com/images/chicken_dance.gif100K miles on 4/7/2010http://www.myemoticons.com/images/chicken_dance.gif
2005 F250 FX4 Supercab Shortbed
2005 F250 FX4 Supercab Shortbed
ARP studs, sct, Leveling kit,Airdog set at 62psi with no factory pump, leveling kit,5" stacks, under cab lights, Large in the way Fan shroud Removed, bed Lights being Re-did. Large Alternator(250amps)(130 amps was so 2003). On 3rd set of Hgs(soon to be 4th), 2nd set of heads, 2nd tubro, egr cooler, FICM and more. When i Turn the Key it does return a Favor, not always in MY Favor.
Da Rules..Here
http://i449.photobucket.com/albums/q...g?t=1249694332
Windows 7 Takes the WIN!
Windows 8 might take that Win
http://www.bcarriveau.com/
Dear Tequila:
We had a deal. You were supposed to make me sexier, smarter and a better dancer. But I saw the video. And I think we need to talk..
How you name your Thread is Important. Read Here
The TDG TOTQ
Windows 7 Takes the WIN!
Windows 8 might take that Win
http://www.bcarriveau.com/
Dear Tequila:
We had a deal. You were supposed to make me sexier, smarter and a better dancer. But I saw the video. And I think we need to talk..
How you name your Thread is Important. Read Here
The TDG TOTQ
********* and Mafia #90
Join Date: Jul 2007
Location: New Berlin, WI
Posts: 14,261
Points: 91,567
Thanks: 943
Thanked 1,333 Times in 985 Posts
Quote:
Originally Posted by Flopster843
The door seal mod. You will need about 60 ft of 3/8"OD 1/4"ID clear poly vinyl tubing from home depot/lowes. I bought 65ft and had about 5ft left over. I'll cost you about $13. Remove the door seals from the truck (self explanitory after you look at them, just pull them off) and lay them out on the floor. Take some standard weed-eater string and snake it thru the hole in the middle of the door seal. Tape that string to the hose you bought, wet the hose with soapy water, and then pull back thru the seal. Once the hose fits good, cut off any extra and then re-install the door seal on your truck. There is no adhesive/glue of any type. It clamps onto a lip around your door. Should be able to have all 4 doors done in about 2 hours, working at an easy pace.
.
:Thumbup:
Bill Carriveau OFFICIAL POO HAULER
http://www.myemoticons.com/images/chicken_dance.gif100K miles on 4/7/2010http://www.myemoticons.com/images/chicken_dance.gif
2005 F250 FX4 Supercab Shortbed
2005 F250 FX4 Supercab Shortbed
ARP studs, sct, Leveling kit,Airdog set at 62psi with no factory pump, leveling kit,5" stacks, under cab lights, Large in the way Fan shroud Removed, bed Lights being Re-did. Large Alternator(250amps)(130 amps was so 2003). On 3rd set of Hgs(soon to be 4th), 2nd set of heads, 2nd tubro, egr cooler, FICM and more. When i Turn the Key it does return a Favor, not always in MY Favor.
Da Rules..Here
http://i449.photobucket.com/albums/q...g?t=1249694332
Windows 7 Takes the WIN!
Windows 8 might take that Win
http://www.bcarriveau.com/
Dear Tequila:
We had a deal. You were supposed to make me sexier, smarter and a better dancer. But I saw the video. And I think we need to talk..
How you name your Thread is Important. Read Here
The TDG TOTQ
Windows 7 Takes the WIN!
Windows 8 might take that Win
http://www.bcarriveau.com/
Dear Tequila:
We had a deal. You were supposed to make me sexier, smarter and a better dancer. But I saw the video. And I think we need to talk..
How you name your Thread is Important. Read Here
The TDG TOTQ
|
| Thread Tools | |
|
Show Printable Version Show Printable Version
Email this Page Email this Page
|
|
| Display Modes | |
|
|
| Posting Rules | |
