Ball joints - Diesel Truck Forum - TheDieselGarage.com
Thread Details Posted by KYmxracer52, this thread has received 7 replies and been viewed 937 times.

 
LinkBack Thread Tools Display Modes
post #1 of 8 (permalink) Old 05-18-2010, 11:42 PM Thread Starter
Member
 
Join Date: Feb 2008
Location: Nicholasville,KY
Posts: 90
Points: 22,897
Thanks: 1
Thanked 3 Times in 3 Posts
Ball joints

I'm going to replace my ball joints in my 05, and was wondering if you guys could give me a complete parts list of what I'll need. I've done searches, but seem to find more about the 04 & older front ends. Please list which parts are dealer only items.

05 F-250 CC SB,Torqshift, 5" ProComp, 20x10 Fuel Hostage, 35" Federal Couragia M/T, B&W ball, MBRP 5" turbo-back, SCT X3, Edge Insight w/pillar mount, Truxedo roll cover*****SOLD***
KYmxracer52 is offline  
Sponsored Links
Advertisement
 
post #2 of 8 (permalink) Old 05-18-2010, 11:58 PM
TDG Official Poo Flinger
 
TANK'S 250's Avatar
 
Join Date: Jan 2005
Location: Chesapeake, VA
Posts: 5,268
Points: 29,778
Thanks: 77
Thanked 474 Times in 262 Posts
Images: 38
Go big or go home...greasable and rebuildable.

scroll down in link

https://www.thedieselgarage.com/forum...ad.php?t=93600

____________________________

2005 F-250, CC,SB,PSD, MANUAL TRANNY

Icon 4.5" lift, 41" IROKS, and some other stuff

Special thanks to:


TrustedPerformance.com
KLMperformance.com
Black Ops Bumpers
FarmboyFabrications.com


TIRES AND WHEELS- 41" IROK Super Swampers, 20 x 10 AR Mojave Teflon-STEERING UPGRADE- Donahoe Racing Dual Stabilizers -FRONT SUSPENSION- Donahoe Racing 4.5" lift -REAR SUSPENSION- 6" Procomp Springs, Farmboy Fabrications Custom Traction Bars-FRONT AXLE UPGRADES- ARB Air locker/ 4.56 Precision Gears -REAR AXLE UPGRADES- ARB Air Locker/ 4.56 Precision Gears -ENGINE UPGRADES -SCT XCAL II w/ Extreme track file- ARP Headstuds - TRUSTED PERFORMANCE Stage II fuel and Oil system - ACCUFAB Intake Elbow - AFE Stage II Intake - MBRP Turbo back Stainless Steel Exhaust - MERLIN controls SPEED WIZARD-TRANSMISSION UPGRADES- Southbend 550+ HP Clutch -INTERIOR MODS-Gauge Works Quad A-pillar pod - Autometer Cobalt Series Gauges Pyro, Boost, Tranny - Cobra Inverter Remote Switch - Cobra Limited Edition Harley Davidson CB - Python Custom alarm system, wired into train horns - Hi-Lift Extreme jack w/ off road base -10,000 watt inverter - 15 gallons of air - Porter Cable 115 volt, 2.5hp Air Compressor - Rhino....Bed liner - EXTERIOR MODS- Harley Heads & Smoked tails- Crown SS braided Brake Lines -Custom Fabricated Front Bumper/ Brushguard w/ Custom Herculiner - (2) 8" Procomp Spotlights -(2) 5" Procomp Spotlights - (2) 5"Procomp Fluted lights - (2) 12 ton Recovery Shackles - Custom Fabricated Safari Rack w/ Custom Herculiner - (8 ) 3" x 5" Procomp Fluted lights - Grover...Triple Train Horns - Wilson 4' Fiberglass CB antenna - Stealth Bulbs Chrome signal bulbs - Dominator...Cowl Hood - Custom Herculined Rocker panels - AMP Research Powersteps - Bushwacker Cut-out Fender Flares - Ventshades - LEER Bed cap - Recon Line of Fire, rear light bar,...and a couple other things
TANK'S 250 is offline  
post #3 of 8 (permalink) Old 05-19-2010, 12:15 AM
MAFIA #8
 
hhrecovery's Avatar
 
Join Date: Dec 2008
Location: Pulaski, VA
Posts: 5,567
Points: 89,949
Thanks: 104
Thanked 223 Times in 209 Posts
Images: 1
Garage
get you a set of moog ball joints from advance or online somewhere... Then you will need the yellow o-rings and seals from the dealer this is all that you will need for the repair....

Aaron - 2004 F350 "Offroad Edition"

2003 F250 "Pulling Truck"
hhrecovery is offline  
post #4 of 8 (permalink) Old 05-19-2010, 02:40 AM Thread Starter
Member
Threadstarter
 
Join Date: Feb 2008
Location: Nicholasville,KY
Posts: 90
Points: 22,897
Thanks: 1
Thanked 3 Times in 3 Posts
Thanks for the quick response. I am definately getting Moog this time. I've heard said that there is differences in quality of Moog parts depending on which vendor you get them from. Any truth to this?

05 F-250 CC SB,Torqshift, 5" ProComp, 20x10 Fuel Hostage, 35" Federal Couragia M/T, B&W ball, MBRP 5" turbo-back, SCT X3, Edge Insight w/pillar mount, Truxedo roll cover*****SOLD***
KYmxracer52 is offline  
post #5 of 8 (permalink) Old 05-23-2010, 12:41 AM
MAFIA #8
 
hhrecovery's Avatar
 
Join Date: Dec 2008
Location: Pulaski, VA
Posts: 5,567
Points: 89,949
Thanks: 104
Thanked 223 Times in 209 Posts
Images: 1
Garage
no just get moog ball joints

Aaron - 2004 F350 "Offroad Edition"

2003 F250 "Pulling Truck"
hhrecovery is offline  
post #6 of 8 (permalink) Old 05-26-2010, 05:48 PM Thread Starter
Member
Threadstarter
 
Join Date: Feb 2008
Location: Nicholasville,KY
Posts: 90
Points: 22,897
Thanks: 1
Thanked 3 Times in 3 Posts
Just bought 4 new ball joints from Advance yesterday. Does Advance rent out the ball joint press?

05 F-250 CC SB,Torqshift, 5" ProComp, 20x10 Fuel Hostage, 35" Federal Couragia M/T, B&W ball, MBRP 5" turbo-back, SCT X3, Edge Insight w/pillar mount, Truxedo roll cover*****SOLD***
KYmxracer52 is offline  
post #7 of 8 (permalink) Old 05-29-2010, 01:42 AM
Senior Member
 
brendonv's Avatar
 
Join Date: Dec 2008
Location: Seymour, Connecticut
Posts: 442
Points: 37,944
Thanks: 3
Thanked 23 Times in 22 Posts
Ya, gotta pay for it first. Don't use a debit, it'll take your money then take days to go back in after you return it.

Early 1999 F350 DRW Dump, 6spd 4x4, 4" Turbo Back and DIY Intake

Early 1999 F350 SRW 8' Box, 6spd 4x4 Stock
brendonv is offline  
post #8 of 8 (permalink) Old 06-03-2010, 04:27 PM Thread Starter
Member
Threadstarter
 
Join Date: Feb 2008
Location: Nicholasville,KY
Posts: 90
Points: 22,897
Thanks: 1
Thanked 3 Times in 3 Posts
I actually rented my press from Oreilly's. I put it on my CC. I belive it was around $120 for the deposit.

05 F-250 CC SB,Torqshift, 5" ProComp, 20x10 Fuel Hostage, 35" Federal Couragia M/T, B&W ball, MBRP 5" turbo-back, SCT X3, Edge Insight w/pillar mount, Truxedo roll cover*****SOLD***
KYmxracer52 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Diesel Truck Forum - TheDieselGarage.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Ball Joints imported_budwagon1274 2003-2007 6.0L Power Stroke 27 09-05-2009 01:14 PM
Ball Joints Again! cumminspride 5.9L Cummins (2003-2007.5) 0 01-18-2008 09:55 PM
ball joints plowmaster General Ford Truck and Excursion 6 10-09-2007 02:31 PM
in need of ball joints stroker_baldy Supporting Vendors Forum 0 10-02-2007 10:51 PM
ball joints blackcloudCTD95 General Dodge Discussion 0 01-28-2007 02:33 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome