Will an 05-07 lift work on a 2010? - Diesel Truck Forum - TheDieselGarage.com
Thread Details Posted by nastyp-stroke1288, this thread has received 13 replies and been viewed 1399 times.

Reply
 
LinkBack Thread Tools Display Modes
post #1 of 14 (permalink) Old 09-01-2009, 07:37 PM Thread Starter
Member
 
Join Date: Jan 2009
Location: Milford, DE
Posts: 148
Points: 6,284
Thanks: 1
Thanked 0 Times in 0 Posts
Will an 05-07 lift work on a 2010?

I just purchased a 2010 f-250. I previously owned a 2005 f-250 with 4 inches of lift. I was wonderin if the lift that i removed from the 05 will work on the 2010 or if some of the parts are different. the 2010 is the same as an 08 or 09. So my question is will my old lift work on an 08 or newer truck? and if not, what parts are different? Thanks in advance!!

-Caleb

2010 Sterling Gray F-250 FX4 Lariat CC SB 6.4L
4 inch lift, 35 13.50 Cooper stt's on 20x10 Mazzi Hulks
Previous trucks: 02ccsb 7.3, 05ccsb 6.0, 05cc king ranch dually 6.0, 05ccsb king ranch 6.0
nastyp-stroke1288 is offline  
Sponsored Links
Advertisement
 
post #2 of 14 (permalink) Old 09-01-2009, 07:50 PM
Member
 
Join Date: Jan 2009
Posts: 278
Points: 24,624
Thanks: 33
Thanked 10 Times in 10 Posts
When I lifted my 08 no other lift would work according to all the 4 wheel drive shops. A few changes in the front end of things. I am not expert but that is what I was told but I am sure with enough fab work it can be done but might be cheaper just to buy it right the 1st time IMO?? Let us know if you find something different.
broth is offline  
post #3 of 14 (permalink) Old 09-01-2009, 08:03 PM Thread Starter
Member
Threadstarter
 
Join Date: Jan 2009
Location: Milford, DE
Posts: 148
Points: 6,284
Thanks: 1
Thanked 0 Times in 0 Posts
Yea i'm afraid to start installing this lift then have somethin not work. Afew people have told me that the only things that are problems are the track bar drop bracket and the pitman are. but my 4 inch lift didnt change anything with the pitman arm so i think im good there. I just dont know about the track bar

-Caleb

2010 Sterling Gray F-250 FX4 Lariat CC SB 6.4L
4 inch lift, 35 13.50 Cooper stt's on 20x10 Mazzi Hulks
Previous trucks: 02ccsb 7.3, 05ccsb 6.0, 05cc king ranch dually 6.0, 05ccsb king ranch 6.0
nastyp-stroke1288 is offline  
post #4 of 14 (permalink) Old 09-01-2009, 08:33 PM
 
powerstroker67's Avatar
 
Join Date: Dec 2008
Location: Connecticut
Posts: 370
Points: 45,211
Thanks: 11
Thanked 41 Times in 36 Posts
It depends on the kit, the changes were in pitman arm and trackbar/brkt. If it's a arm drop brkt kit with no steering corrections, I'd say it would work.

SPARTAN SCT + H+S TUNERS IN STOCK,SAME DAY SHIPPING TIL 5PM

NEW 6.4 COOLER ONLY DELETES, 6.7 COOLER DELETES BUILD INHOUSE!!!

ONE PIECE, BEST FITTING, AND USA MADE CAT/DPF 3.5,4 AND 5 CUSTOM APPLICATIONS AVAILABLE


[email protected]
www.streetdieselperformance.com
(860)250-6082 Sean tech questions
www.dpfdeletekits.com
(919)636-1518 Aaron sales
2011 F350 Lariat, CC,SB,SRW H+S MINI,CAT/DPF W/ full 5" Magna, 8" Procomp, American Force 22",37" Dunlop Maxx Tractions
2008 F450 Lariat,4X4,4.88's,Job1,Loaded,Spartan310,TCM,SCT w/ Eric's tunes,Elite studs+EGR delete,Updated Head gskts.,POWERSTROKER67 CAT/DPF pipe,AFE,Suncoast T/C,Spearco
powerstroker67 is offline  
post #5 of 14 (permalink) Old 09-01-2009, 09:30 PM Thread Starter
Member
Threadstarter
 
Join Date: Jan 2009
Location: Milford, DE
Posts: 148
Points: 6,284
Thanks: 1
Thanked 0 Times in 0 Posts
So will the track bar drop bracket work ok? Or is that the one your sayin is the problem? Cus on my 05 the kit didnt change anything about the pitman arm. It stayed the same. It just dropped the track bar

-Caleb

2010 Sterling Gray F-250 FX4 Lariat CC SB 6.4L
4 inch lift, 35 13.50 Cooper stt's on 20x10 Mazzi Hulks
Previous trucks: 02ccsb 7.3, 05ccsb 6.0, 05cc king ranch dually 6.0, 05ccsb king ranch 6.0
nastyp-stroke1288 is offline  
post #6 of 14 (permalink) Old 09-02-2009, 01:33 AM Thread Starter
Member
Threadstarter
 
Join Date: Jan 2009
Location: Milford, DE
Posts: 148
Points: 6,284
Thanks: 1
Thanked 0 Times in 0 Posts
So im still kinda confused on whether or not this lift will work or not. So anymore help any one can give me would be great. I would hate to have to take everything apart just to see if it would work. Then have to put it all back together if it didnt.

-Caleb

2010 Sterling Gray F-250 FX4 Lariat CC SB 6.4L
4 inch lift, 35 13.50 Cooper stt's on 20x10 Mazzi Hulks
Previous trucks: 02ccsb 7.3, 05ccsb 6.0, 05cc king ranch dually 6.0, 05ccsb king ranch 6.0
nastyp-stroke1288 is offline  
post #7 of 14 (permalink) Old 09-02-2009, 05:38 AM
Senior Member
 
Rene G's Avatar
 
Join Date: Jan 2006
Location: Grande Prairie, AB
Posts: 773
Points: 27,483
Thanks: 58
Thanked 42 Times in 41 Posts
You could call the manufacturer of the lift and ask them

09 F-350 FX4 lux package, everything but sunroof
Suncoast rebuilt trans. and converter
Line-X box liner and rocker panels
4-lightforce lights on KC light bar
OUO Traction 5"traction blocks
Icon adjustable track bar
Air bags and compressor
Icon 2.5" Leveling kit
Marathon sled deck
Flo-pro exhaust
S&B intake

Waiting for time to install
Dirty Diesel cold side I/C pipe


CANADIAN CLUB MEMBER #15
SINGLES CLUB MEMBER #227

spartan tuned courtesy of www.dirtydieselcustoms.com
Rene G is offline  
post #8 of 14 (permalink) Old 09-02-2009, 12:05 PM
 
powerstroker67's Avatar
 
Join Date: Dec 2008
Location: Connecticut
Posts: 370
Points: 45,211
Thanks: 11
Thanked 41 Times in 36 Posts
Quote:
Originally Posted by nastyp-stroke1288 View Post
So will the track bar drop bracket work ok? Or is that the one your sayin is the problem? Cus on my 05 the kit didnt change anything about the pitman arm. It stayed the same. It just dropped the track bar
The Procomp kit's I've used the trackbar brkt is the same 05-07 vs. 08+up. I don't know for sure on ALL kits. You could also check the install instructions for the kit/ brand you have, they usually list the items and parts numbers contained in the kit. Cross reference this to the parts needed for the newer truck.

SPARTAN SCT + H+S TUNERS IN STOCK,SAME DAY SHIPPING TIL 5PM

NEW 6.4 COOLER ONLY DELETES, 6.7 COOLER DELETES BUILD INHOUSE!!!

ONE PIECE, BEST FITTING, AND USA MADE CAT/DPF 3.5,4 AND 5 CUSTOM APPLICATIONS AVAILABLE


[email protected]
www.streetdieselperformance.com
(860)250-6082 Sean tech questions
www.dpfdeletekits.com
(919)636-1518 Aaron sales
2011 F350 Lariat, CC,SB,SRW H+S MINI,CAT/DPF W/ full 5" Magna, 8" Procomp, American Force 22",37" Dunlop Maxx Tractions
2008 F450 Lariat,4X4,4.88's,Job1,Loaded,Spartan310,TCM,SCT w/ Eric's tunes,Elite studs+EGR delete,Updated Head gskts.,POWERSTROKER67 CAT/DPF pipe,AFE,Suncoast T/C,Spearco
powerstroker67 is offline  
post #9 of 14 (permalink) Old 09-02-2009, 03:43 PM
Auto's are for pansies
 
Slick Willie's Avatar
 
Join Date: Dec 2008
Location: Brownsboro, TEXAS
Posts: 2,117
Points: 82,727
Thanks: 111
Thanked 191 Times in 139 Posts
Take some measurements. You have the kit already, right? You have the truck already, right? Measure twice, install once.

'10 F350, CCLB, SRW, 4x4, 6 speed, 2.5" AutoSpring front leveling pucks, 37 x 13.50 x 18 Toyo's, 18 x 9 XD Diesel's, Road Armors front/rear

Slick Willie is offline  
post #10 of 14 (permalink) Old 09-02-2009, 06:31 PM Thread Starter
Member
Threadstarter
 
Join Date: Jan 2009
Location: Milford, DE
Posts: 148
Points: 6,284
Thanks: 1
Thanked 0 Times in 0 Posts
I just went on superlifts website and printed out a list of parts that the 4 inch lift for an 05-07 comes with. Then i went to there 08 and newer 4 inch lift and did the same thing. I compared the lists and they look completely different. So now im really lost. The suspension on both trucks looks exactly the same. Theres no way every part is different.

-Caleb

2010 Sterling Gray F-250 FX4 Lariat CC SB 6.4L
4 inch lift, 35 13.50 Cooper stt's on 20x10 Mazzi Hulks
Previous trucks: 02ccsb 7.3, 05ccsb 6.0, 05cc king ranch dually 6.0, 05ccsb king ranch 6.0
nastyp-stroke1288 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Diesel Truck Forum - TheDieselGarage.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
2010 EPA standards todd2008 Medium and Heavy Duty 5 08-25-2009 02:28 AM
2010 Maxforce fjh Medium and Heavy Duty 4 06-19-2009 03:18 PM
2010 ram spoted StrokerAce The Parking Lot 33 03-01-2009 08:34 PM
35" tires...will a leveling kit work or do I need a lift?? thebeas01 General Dodge Discussion 6 09-22-2006 01:09 AM
Will this lift/level combo work? Sydwaiz General Ford Truck and Excursion 9 02-24-2006 05:03 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome