Stainless Tips, Tips and More Tips Cheap.... - Diesel Truck Forum - TheDieselGarage.com
Thread Details Posted by DppPower, this thread has received 33 replies and been viewed 3090 times.

Reply
 
LinkBack Thread Tools Display Modes
post #1 of 34 (permalink) Old 06-29-2009, 04:21 AM Thread Starter
Senior Member
 
DppPower's Avatar
 
Join Date: Dec 2008
Location: Marshfield, Missouri
Posts: 452
Points: 55,088
Thanks: 4
Thanked 63 Times in 37 Posts
Stainless Tips, Tips and More Tips Cheap....

I am in the process of closing a deal for 250 polished stainless exhaust tips. If I get this deal done tomorrow like I am planning too these will be CHEAP CHEAP CHEAP.

There are bolt on, clamp on, and weld on tips ranging from 4"x5" 5"x5" and 5"x6" (inlet x outlet) and the lengths rang from 12" 14" 18" 22".

Styles will range from rolled tipped straight, rolled tipped angeled, turn downs, and straights.

Now when I say Cheap I am figuring these will range from $20 for the smallest to $40 for the largest. The more you buy the cheaper they will get.

So if you are needing a tip or multiple tips then let me know as this will be a one time deal only.

If any of the other vendors would be interested in buying some of these I will also cut you a deal for buying several at a time.


I will post up more info tomorrow to let you all know if and when this deal is done for sure.

2008 F350 6.4L Crew Cab Short Bed - Few basic mods.
1999 F250 Reg. Cab - Twin Parallel Turbo Pulling Truck


"A woman who demands further gun control is like a chicken who roots for Colonel Sanders"

“Nobody can go back and start a new beginning, but anyone can start today and make a new ending.”

“For whosoever shall call upon the name of the Lord shall be saved” Romans 10:12-13

Last edited by DppPower; 06-29-2009 at 04:23 AM.
DppPower is offline  
Sponsored Links
Advertisement
 
post #2 of 34 (permalink) Old 06-29-2009, 12:57 PM
Another day in paradise
 
nevrknow's Avatar
 
Join Date: May 2009
Location: Aiken,SC
Posts: 284
Points: 6,832
Thanks: 27
Thanked 42 Times in 39 Posts
You've sold one already.
nevrknow is offline  
post #3 of 34 (permalink) Old 06-29-2009, 06:53 PM Thread Starter
Senior Member
Threadstarter
 
DppPower's Avatar
 
Join Date: Dec 2008
Location: Marshfield, Missouri
Posts: 452
Points: 55,088
Thanks: 4
Thanked 63 Times in 37 Posts
Looks like I may be heading to get these tomorrow. Pricing is not set in stone yet but they will be the prices I listed above or cheaper.

Soon as I have them here at the shop I will be taking pics and setting the final prices.

I already have a couple other vendors wanting to purchase several from me so if you are interested then you better act fast once I get them here.

2008 F350 6.4L Crew Cab Short Bed - Few basic mods.
1999 F250 Reg. Cab - Twin Parallel Turbo Pulling Truck


"A woman who demands further gun control is like a chicken who roots for Colonel Sanders"

“Nobody can go back and start a new beginning, but anyone can start today and make a new ending.”

“For whosoever shall call upon the name of the Lord shall be saved” Romans 10:12-13
DppPower is offline  
post #4 of 34 (permalink) Old 06-29-2009, 08:52 PM Thread Starter
Senior Member
Threadstarter
 
DppPower's Avatar
 
Join Date: Dec 2008
Location: Marshfield, Missouri
Posts: 452
Points: 55,088
Thanks: 4
Thanked 63 Times in 37 Posts
OK, I am going to head out in a little while to go pick these up. So as long as everything looks as good in person as they are telling me on the phone and they do in the pics this deal is done and I will have them all setting here tonight.

My phone and emails have went nuts over these things already and I not even have them here yet.

2008 F350 6.4L Crew Cab Short Bed - Few basic mods.
1999 F250 Reg. Cab - Twin Parallel Turbo Pulling Truck


"A woman who demands further gun control is like a chicken who roots for Colonel Sanders"

“Nobody can go back and start a new beginning, but anyone can start today and make a new ending.”

“For whosoever shall call upon the name of the Lord shall be saved” Romans 10:12-13
DppPower is offline  
post #5 of 34 (permalink) Old 06-30-2009, 02:39 AM
Born in the USA
 
patriot2500's Avatar
 
Join Date: Mar 2006
Location: Montville, NJ
Posts: 2,651
Points: 14,564
Thanks: 295
Thanked 466 Times in 398 Posts
Garage
Send a message via AIM to patriot2500
Possible for a turndown 5-6' or 5-7'? Let me know.

Tom
2004.5 Dodge 2500 QC/LB - Goerand 48RE, 4.10's, AFE Stage II, Magnaflow 5" TBE w/6" tip, Smarty TNT/REVO, PacBrake, ATS Manifold, ATS Triple Lok Commander, ISSPRO EGT, Trans, Boost on the pillar, FASS 150, 35X12.50 Toyo M/T's on '06 wheels, Mag/Hytec front/rear diff covers and trans pan, Full Recon Lighting, Prodigy Brake Controller, Silverstars, WeatherGuard Toolbox, BackRack, Kenwood Radio w/ 2 MTX Thunder 4500 subs, Sirius, CompuStar Alarm/Remote Start, Husky Floormats


Thanks to Kenny @ KTPerformance.net

2007 Honda Foreman 500 ES - Rack bag, gun racks, trailer hitch, Cycle Country plow, 27" ITP's on ITP Delta Steel Wheels
patriot2500 is offline  
post #6 of 34 (permalink) Old 06-30-2009, 03:59 AM
I can count to Potatoe
 
Join Date: Dec 2008
Posts: 595
Points: 33,442
Thanks: 4
Thanked 99 Times in 51 Posts
im looking for a 4-5 or a 4-6 let me know and post pics!
dayusex is offline  
post #7 of 34 (permalink) Old 06-30-2009, 04:05 AM
Another day in paradise
 
nevrknow's Avatar
 
Join Date: May 2009
Location: Aiken,SC
Posts: 284
Points: 6,832
Thanks: 27
Thanked 42 Times in 39 Posts
I want a 4-6 18"?....lemme know
nevrknow is offline  
post #8 of 34 (permalink) Old 06-30-2009, 04:31 AM Thread Starter
Senior Member
Threadstarter
 
DppPower's Avatar
 
Join Date: Dec 2008
Location: Marshfield, Missouri
Posts: 452
Points: 55,088
Thanks: 4
Thanked 63 Times in 37 Posts
Well we just made it back. What a pile of tips.



Got to seperate and organize in the morning and then I will be posting pics and prices sometime tomorrow.

2008 F350 6.4L Crew Cab Short Bed - Few basic mods.
1999 F250 Reg. Cab - Twin Parallel Turbo Pulling Truck


"A woman who demands further gun control is like a chicken who roots for Colonel Sanders"

“Nobody can go back and start a new beginning, but anyone can start today and make a new ending.”

“For whosoever shall call upon the name of the Lord shall be saved” Romans 10:12-13
DppPower is offline  
post #9 of 34 (permalink) Old 06-30-2009, 08:23 PM Thread Starter
Senior Member
Threadstarter
 
DppPower's Avatar
 
Join Date: Dec 2008
Location: Marshfield, Missouri
Posts: 452
Points: 55,088
Thanks: 4
Thanked 63 Times in 37 Posts
Well I have just about pulled my hair out trying to get these seperated and inventoried and have come up with different numbers each time.:doh:

Here is what I know I have along with prices.

8 - 5"x5"x11" Angle - Clamp On - $15.00
10 - 4"x5"x12" Angle - Bolt On - $15.00
8 - 5"x5"x12" Angle - Clamp On - $15.00
8 - 4"x5"x12" Angle - Weld On - $15.00
16 - 4"x5"x12" Angle - Bolt On - $15.00 These are Chrome over Stainless

4 - 5"x6"x18" Angle - Clamp On - $23.00
15 - 5"x6"x18" Angle - Bolt On - $23.00
9 - 4"x5"x18" Angle - Clamp On - $23.00
18 - 4"x5"x18" Angle - Bolt On - $23.00
4 - 5"x6"x18" Angle - Clamp On - $23.00

16 - 5"x6"x22" Angle - Bolt On - $31.00
13 - 5"x6"x22" Angle - Clamp On - $31.00
9 - 4"x5"x22" Angle - Clamp On - $31.00
9 - 4"x5"x22" Angle - Bolt On - $31.00


8 - 4"x5"x12" Straight - Weld On - Rolled Edge - $19.00
4 - 5"x5"x12" Angle - Clamp On - Rolled Edge - $19.00

13 - 5"x6"x18" Angle - Clamp On - Rolled Edge - $27.00
8 - 5"x5"x18" Angle - Clamp On - Rolled Edge - $27.00
10 - 5"x6"x18" Angle - Weld On - Rolled Edge - $27.00

2 - 5"x6"x22" Angle - Bolt On - Rolled Edge - $35.00
8 - 4"x5"x22" Angle - Bolt On - Rolled Edge - $35.00
8 - 5"x6"x22" Angle - Clamp - Rolled Edge - $35

10 - 5"x5"x14" Turn Down - Weld On - $19.00
9 - 4"x5"x16" Turn Down - Weld On - $25.00
15 - 4"x5"x22" Turn Down - Bolt On - $32.00


I tried to get pictures of all of them but my camera died and my charger is at home.:doh: So there are a couple of these I did not get pics of.

When we got there they also had some Silverline tips that I managed to talk them out of. They were a little more pricey but they were still way cheaper then I can buy them for direct. I also was not able to get pics of these because camera died so I am working on getting some off their website and will post up pics and pricing shortly.











2008 F350 6.4L Crew Cab Short Bed - Few basic mods.
1999 F250 Reg. Cab - Twin Parallel Turbo Pulling Truck


"A woman who demands further gun control is like a chicken who roots for Colonel Sanders"

“Nobody can go back and start a new beginning, but anyone can start today and make a new ending.”

“For whosoever shall call upon the name of the Lord shall be saved” Romans 10:12-13
DppPower is offline  
post #10 of 34 (permalink) Old 06-30-2009, 08:32 PM
Senior Member
 
Join Date: Jan 2009
Posts: 1,409
Points: 4,911
Thanks: 34
Thanked 40 Times in 30 Posts
PM sent.
mckey73 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Diesel Truck Forum - TheDieselGarage.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Lly Tips TOMAN Whats Been Sold 0 11-13-2007 01:12 PM
tips big peter 1994-2003 7.3L Power Stroke 5 10-09-2007 04:37 AM
Tips powerstroke2003 Sled Pulling 8 08-24-2007 11:40 PM
any tips fuzzys69 Drag Racing 12 02-20-2006 02:53 AM
4" x 5" x 15" Polished Stainless Steel Exhaust Tips! DPDIESEL Supporting Vendors Forum 14 02-10-2006 03:07 AM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome