F/S Built 47re 4x4 - Diesel Truck Forum - TheDieselGarage.com
Thread Details Posted by smokin24valve, this thread has received 5 replies and been viewed 1762 times.

 
LinkBack Thread Tools Display Modes
post #1 of 6 (permalink) Old 07-15-2010, 03:00 AM Thread Starter
WHOS NEXT
 
Join Date: Dec 2008
Location: Schaefferstown PA
Posts: 182
Points: 26,483
Thanks: 39
Thanked 15 Times in 11 Posts
F/S Built 47re 4x4

Trans was built by Laddel Weaver from Pro Diesel Werks (was East Coast Diesel) about a year and a half ago and has less then 10k on it. Its one of his stage 5 trans. Trans has a billet input and output shafts, custom valve body, upgraded clutches and clutch counts comes with a dunrite triple disk converter (i believe stock stall), a billet flex plate, double deep mag-hytec pan, external trans cooler with fan. Fluid and filter was changed every 6 months by Laddel and he only uses Schaeffer Full Syn fluid. trans shifts great and is still very tight just goin to a 5 speed. truck was never towed or been sled pulled. maybe 6 quarter mile passes just for fun. truck made 603hp and 1157 ft/lbs but i believe trans is rated for at least 750+hp. i might be missing something, if i come up with anything else ill let you know

asking $4,500obo. feel free to give me a call (717)821-8198. Could ship at buyers expense or deliver within reason for a fee.

trans is still in truck but could have out in pretty quick. if your serious and local i might let you take it for a test drive.

My truck:
1999 Dodge 24 Valve Cummins
P pump conversion with a 180 pump
Pump doesn't have a fuel plate, 4g springs, & full cut dv's, no afc, ect..
.093 fuel lines
Air Dog 165
custom ground cam
mahle pistons with .050 valve reliefs
balanced rotating assembly
8 x 11 injectors
ported head with 60lbs valve springs and 12mm studs
Pro 52
Polydyn header
stage 5 east coast diesel bullit automatic trans.
triple disk dunrite torque converter
4.10 gears
klienn train horns
Nubers with the twins and without header
603hp 1157tq
12.7 quarter mile (then ht3b blew again)
smokin24valve is offline  
Sponsored Links
Advertisement
 
post #2 of 6 (permalink) Old 07-24-2010, 02:15 AM Thread Starter
WHOS NEXT
Threadstarter
 
Join Date: Dec 2008
Location: Schaefferstown PA
Posts: 182
Points: 26,483
Thanks: 39
Thanked 15 Times in 11 Posts
Bump $4000

My truck:
1999 Dodge 24 Valve Cummins
P pump conversion with a 180 pump
Pump doesn't have a fuel plate, 4g springs, & full cut dv's, no afc, ect..
.093 fuel lines
Air Dog 165
custom ground cam
mahle pistons with .050 valve reliefs
balanced rotating assembly
8 x 11 injectors
ported head with 60lbs valve springs and 12mm studs
Pro 52
Polydyn header
stage 5 east coast diesel bullit automatic trans.
triple disk dunrite torque converter
4.10 gears
klienn train horns
Nubers with the twins and without header
603hp 1157tq
12.7 quarter mile (then ht3b blew again)
smokin24valve is offline  
post #3 of 6 (permalink) Old 08-18-2010, 02:17 PM Thread Starter
WHOS NEXT
Threadstarter
 
Join Date: Dec 2008
Location: Schaefferstown PA
Posts: 182
Points: 26,483
Thanks: 39
Thanked 15 Times in 11 Posts
$3700 obo. This has to go. Need to pay some bills

My truck:
1999 Dodge 24 Valve Cummins
P pump conversion with a 180 pump
Pump doesn't have a fuel plate, 4g springs, & full cut dv's, no afc, ect..
.093 fuel lines
Air Dog 165
custom ground cam
mahle pistons with .050 valve reliefs
balanced rotating assembly
8 x 11 injectors
ported head with 60lbs valve springs and 12mm studs
Pro 52
Polydyn header
stage 5 east coast diesel bullit automatic trans.
triple disk dunrite torque converter
4.10 gears
klienn train horns
Nubers with the twins and without header
603hp 1157tq
12.7 quarter mile (then ht3b blew again)
smokin24valve is offline  
post #4 of 6 (permalink) Old 09-18-2010, 07:30 PM Thread Starter
WHOS NEXT
Threadstarter
 
Join Date: Dec 2008
Location: Schaefferstown PA
Posts: 182
Points: 26,483
Thanks: 39
Thanked 15 Times in 11 Posts
somebody needs a good solid tranny. make offers guys the worst ill say is no.

My truck:
1999 Dodge 24 Valve Cummins
P pump conversion with a 180 pump
Pump doesn't have a fuel plate, 4g springs, & full cut dv's, no afc, ect..
.093 fuel lines
Air Dog 165
custom ground cam
mahle pistons with .050 valve reliefs
balanced rotating assembly
8 x 11 injectors
ported head with 60lbs valve springs and 12mm studs
Pro 52
Polydyn header
stage 5 east coast diesel bullit automatic trans.
triple disk dunrite torque converter
4.10 gears
klienn train horns
Nubers with the twins and without header
603hp 1157tq
12.7 quarter mile (then ht3b blew again)
smokin24valve is offline  
post #5 of 6 (permalink) Old 10-15-2010, 06:05 AM
Junior Member
 
Calltrex's Avatar
 
Join Date: Oct 2010
Posts: 19
Points: 19,260
Thanks: 0
Thanked 2 Times in 2 Posts
electric?

2003 Dodge 4 door 4x4, Auto
Edge computer with attitude,Cold Air Intake
Exhaust System. 33" Terra Grapplers
AirDog 150 Fuel System
Calltrex is offline  
post #6 of 6 (permalink) Old 10-21-2010, 04:33 PM
Singles Club #2
 
smokndiesel7588's Avatar
 
Join Date: Dec 2008
Location: Lebanon, PA/Flint, MI
Posts: 496
Points: 32,171
Thanks: 40
Thanked 30 Times in 30 Posts


Send a message via AIM to smokndiesel7588
trans is sold

Greg
My Truck- '02 Dodge Ram 2500 QCLB...ISSPRO Gauges...110hp DDP Injectors...Smarty..TST Comp..Pro52 turbo..BHAF...4" Turbo back to single 8" mitre...converted to NV5600 with SB Street DD

Bro's Trucks- 97 Dodge Ram 2500 5spd 12V...DDP 90hp Injectors...Half-Cut DV's..0 Plate...starwheel turned..kdp & 5th gear fix...17.5deg timing...SB Feramic 13" clutch

96 Dodge Ram 2500 12V XCLB...auto...2wd...SOLD
smokndiesel7588 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Diesel Truck Forum - TheDieselGarage.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
feeler: built HTS 47re SmokeN 12 ValvE Dodge Parts 2 02-24-2010 03:19 PM
Built Goerend 47RE OverPressured Dodge Parts 0 01-15-2010 04:23 AM
47re dieselsmoke74 5.9L Cummins (1998.5-2002) 5 07-12-2009 04:38 AM
47re? 03cmmns 5.9L Cummins (2003-2007.5) 0 09-11-2007 04:27 AM
47re ?? dangerous196 5.9L Cummins 12 Valve (1994-1998.5) 7 06-10-2007 05:14 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome