Matco 3/4 inch drive composite impact - Diesel Truck Forum - TheDieselGarage.com
Thread Details Posted by smokin24valve, this thread has received 5 replies and been viewed 4384 times.

 
LinkBack Thread Tools Display Modes
post #1 of 6 (permalink) Old 01-16-2010, 02:36 AM Thread Starter
WHOS NEXT
 
Join Date: Dec 2008
Location: Schaefferstown PA
Posts: 182
Points: 26,657
Thanks: 39
Thanked 15 Times in 11 Posts
Matco 3/4 inch drive composite impact

part number MT2141

INFO

I paid $735 about 6 - 8 months ago. I worked in a truck shop that had a 3/4 gun however it was a better paper weight than a tool. It had no power at all. I believe that after god created adam and eve he created that gun. To make a long story short, I bought my own personal gun that was used by me and only me about 4 or 5 times for lugs that my 1/2 drive gun wouldnt move and once on the yoke on a rear. I put a drop or two of oil in it everytime I used it. I no longer work there, the shop I am at now has a good shop supplied 3/4 gun, so I am no longer in need of this one. I would sell it for $500 shipped in the lower 48 states. It is very light and rated at 1200 ft/lbs of torque. it also comes with a protective cover.

http://www.matcotools.com/Catalog/to...select=&page=3

My truck:
1999 Dodge 24 Valve Cummins
P pump conversion with a 180 pump
Pump doesn't have a fuel plate, 4g springs, & full cut dv's, no afc, ect..
.093 fuel lines
Air Dog 165
custom ground cam
mahle pistons with .050 valve reliefs
balanced rotating assembly
8 x 11 injectors
ported head with 60lbs valve springs and 12mm studs
Pro 52
Polydyn header
stage 5 east coast diesel bullit automatic trans.
triple disk dunrite torque converter
4.10 gears
klienn train horns
Nubers with the twins and without header
603hp 1157tq
12.7 quarter mile (then ht3b blew again)
smokin24valve is offline  
Sponsored Links
Advertisement
 
post #2 of 6 (permalink) Old 01-31-2010, 06:17 PM Thread Starter
WHOS NEXT
Threadstarter
 
Join Date: Dec 2008
Location: Schaefferstown PA
Posts: 182
Points: 26,657
Thanks: 39
Thanked 15 Times in 11 Posts
Price drop $450 shipped. Also open to offers. Shoot me a pm.

My truck:
1999 Dodge 24 Valve Cummins
P pump conversion with a 180 pump
Pump doesn't have a fuel plate, 4g springs, & full cut dv's, no afc, ect..
.093 fuel lines
Air Dog 165
custom ground cam
mahle pistons with .050 valve reliefs
balanced rotating assembly
8 x 11 injectors
ported head with 60lbs valve springs and 12mm studs
Pro 52
Polydyn header
stage 5 east coast diesel bullit automatic trans.
triple disk dunrite torque converter
4.10 gears
klienn train horns
Nubers with the twins and without header
603hp 1157tq
12.7 quarter mile (then ht3b blew again)
smokin24valve is offline  
post #3 of 6 (permalink) Old 02-12-2010, 02:32 AM
Member
 
Join Date: Jan 2008
Posts: 172
Points: 3,372
Thanks: 1
Thanked 2 Times in 2 Posts
can you post pictures of the actual unit?

Early 99 7.3 BTS tunes and trans
nhill2090 is offline  
post #4 of 6 (permalink) Old 02-22-2010, 04:54 PM Thread Starter
WHOS NEXT
Threadstarter
 
Join Date: Dec 2008
Location: Schaefferstown PA
Posts: 182
Points: 26,657
Thanks: 39
Thanked 15 Times in 11 Posts
Yes I can post some pictures hopefully this weekend. I brought my camera to work today and snapped some pictures. I just have to figure out how to post pics on here again. I use my phone to go on TDG a lot so sorry for the delay just been pretty busy. If you'd like I could send you a picture message of the gun until I get them loaded on the computer and what not. Just shoot me a pm. Sorry it took me so long.

My truck:
1999 Dodge 24 Valve Cummins
P pump conversion with a 180 pump
Pump doesn't have a fuel plate, 4g springs, & full cut dv's, no afc, ect..
.093 fuel lines
Air Dog 165
custom ground cam
mahle pistons with .050 valve reliefs
balanced rotating assembly
8 x 11 injectors
ported head with 60lbs valve springs and 12mm studs
Pro 52
Polydyn header
stage 5 east coast diesel bullit automatic trans.
triple disk dunrite torque converter
4.10 gears
klienn train horns
Nubers with the twins and without header
603hp 1157tq
12.7 quarter mile (then ht3b blew again)
smokin24valve is offline  
post #5 of 6 (permalink) Old 02-27-2010, 10:10 PM Thread Starter
WHOS NEXT
Threadstarter
 
Join Date: Dec 2008
Location: Schaefferstown PA
Posts: 182
Points: 26,657
Thanks: 39
Thanked 15 Times in 11 Posts
here are some pictures








My truck:
1999 Dodge 24 Valve Cummins
P pump conversion with a 180 pump
Pump doesn't have a fuel plate, 4g springs, & full cut dv's, no afc, ect..
.093 fuel lines
Air Dog 165
custom ground cam
mahle pistons with .050 valve reliefs
balanced rotating assembly
8 x 11 injectors
ported head with 60lbs valve springs and 12mm studs
Pro 52
Polydyn header
stage 5 east coast diesel bullit automatic trans.
triple disk dunrite torque converter
4.10 gears
klienn train horns
Nubers with the twins and without header
603hp 1157tq
12.7 quarter mile (then ht3b blew again)
smokin24valve is offline  
post #6 of 6 (permalink) Old 03-22-2010, 12:03 AM Thread Starter
WHOS NEXT
Threadstarter
 
Join Date: Dec 2008
Location: Schaefferstown PA
Posts: 182
Points: 26,657
Thanks: 39
Thanked 15 Times in 11 Posts
Offers anyone?

My truck:
1999 Dodge 24 Valve Cummins
P pump conversion with a 180 pump
Pump doesn't have a fuel plate, 4g springs, & full cut dv's, no afc, ect..
.093 fuel lines
Air Dog 165
custom ground cam
mahle pistons with .050 valve reliefs
balanced rotating assembly
8 x 11 injectors
ported head with 60lbs valve springs and 12mm studs
Pro 52
Polydyn header
stage 5 east coast diesel bullit automatic trans.
triple disk dunrite torque converter
4.10 gears
klienn train horns
Nubers with the twins and without header
603hp 1157tq
12.7 quarter mile (then ht3b blew again)
smokin24valve is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Diesel Truck Forum - TheDieselGarage.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Almost New, Matco 5 series toolbox with Hutch BigRed Cummins Everything Else 5 03-07-2010 10:02 PM
Free inch impact wrench Lonesome7.3 Whats Been Sold 2 12-03-2009 11:20 AM
35 inch Toyos on 16 inch rims cash or trade. woodsman Ford Parts 7 10-26-2009 05:11 PM
Front Drive Axle (9.25 inch) ripmf666 GM Spec Info 0 12-28-2008 11:09 AM
What Kind of impact will this have? Timbeaux38 The Parking Lot 12 03-30-2006 01:43 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome