The Diesel Garage banner

Tonneau cover with a toolbox?

3K views 10 replies 6 participants last post by  Buckshot341 
#1 ·
Anybody have a tonneau cover on their truck AND a toolbox? I put an Advantage Kwik Draw on my mom's Dakota this weekend and really like it over other tonneau covers... No stupid snaps, removes in 30 seconds, etc. Anybody know of anything like this that will work on a long bed truck with a toolbox? Toolbox is 18" wide, so a short box cover won't work.
 
#3 ·
Looks good, although I'm not liking the $500+ price tag...
 
#5 ·
Other than a tarp or spray-painting some plywood black, that might be your only option. When the market for a product is as small as it is for a tonneau to fit a truck with a toolbox, prices are bound to go up, e.g. how early '99-specific parts cost more than the equivalent part to fit a '99.5-'04 Superduty.
 
#4 ·
You might put awning rail on the box and sew a flex cover to fit. An angle mounted to the front of the box with foam gasket will help with the water intrusion.

Using a bow to mark the mounting on the awning rail will help shed water also.

keydl
 
#11 ·
what I ended up doing because the under the rail wouldnt fit, i got an over the rail box, and just cut my cover down, turned out awesome, just measured a few times before i made the cuts
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top