Search Results for ‘no start’

Hello all! Anyone had a crank sensor go bad? Truck is running great but I’ve had some starting issues. Nothing major until a few nights ago. A little back story; I started having cold start issues initially, which I diagnosed, confirmed, and replaced a bad glow plug relay. However, even after...

Proud owner of a 2000 F250 7.3L,she's been a great truck 410,000 current miles and she still running great. Yesterday she started acting up, all of a sudden electrical power dissapears causing it to stall. Took a voltmeter to the batteries,starter and alternator all good readings 13+. Now here...

I have an 01 7.3 super duty. Changed the oil drove it 300 ft and she died. Will crank all day but won't fire. Disconnected ipr and icp and still nothing. I have the 100 rpms during crank but won't fire off. Any ideas?

Havin trouble guys need help my truck got a 2285 code before it died a week later, took it apart oil cooler was plugged, it used to start if hot outside but not cold,,,did egr delete while in there,replaced oil cooler and gaskets ect, rebuilt ipr, scanguage reads icp good ficm dropped to 22...

Rebuilt ipr 2285 code a week before it died for good, scanguage shows icp is good, put new oil cooler in and egr delete while I had it apart, ficm showed 47 then dropped as low as 23 when cranking,,,need help

Wanted to intro myself my name is Jacob and havin trouble gettin my 6.0 runnin so I'm lookin for advice,,,thanks!

I have a dt466,That when I start it;it only runs about five mins.I have replace the hpo rail o-rins,VCG,ICP Sensor...Also I have replaced the IPR? The high pressure oil is dropping at cranking but when I tap on the IPR it starts rite up so that would mean replacing the IPR.But I have replaced...