Search Results for ‘powerstroke’

I know it's probably a long shot but figured I would ask anyways. Long story short I had my truck in 4high (towing through mud) afterwards with no trailer hooked up I hit the road in front of my house to knock all the mud off just a couple short launches nothing to bad. Afterwards pulled back...

I know it's probably a long shot but figured I would ask anyways. Long story short I had my truck in 4high (towing through mud) afterwards with no trailer hooked up I hit the road in front of my house to knock all the mud off just a couple short launches nothing to bad. Afterwards pulled back...

I have a known exhaust leak that causes me to lose power. Just had the brakes replaced so it's been stationary for a good while. Started it up and after I release the throttle, it loses power and starts hissing. Not sure if it's just the exhaust or not. When I started it, it was pretty cold, so...

Use of a CGI crankcase was one of many firsts the 6.7L Power Stroke brought to the ¾-ton and larger truck segment. All blocks are cast by Tupy, where they also receive their initial machining. From there, the blocks are shipped to Ford’s Chihuahua, Mexico engine plant. Notice the block’s...

With factory-installed compound turbos, a tuned 6.4L Power Stroke can move some serious air. At 40+ psi boost pressures, the charge air temperatures climb rapidly, which reduces air density. While the turbos may be moving more air, that hot air is less effective in the combustion chamber and...

Early 6.7L Power Stroke (Scorpion) diesel engines came with a composite oil pan. These are subject to leaking over time. Without an upgrade, you’ll be dripping your oil on the ground as it passes though the engine.

Currently working on various upgrades to my 2008 6.4L F-250. Wondering what suggestions I can get for my Aeromotive fuel pump upgrade (mostly regarding the recommended speed controller), and my stock turbo upgrade.

so i have a 1995 7.3L power stroke i bought her knowing the turbo leaked then proceeded to replace turbo O rings which i did now i found out she was leaking oil from the injectors which caused her to burn a TON of oil im talking 1 qt every 20 miles and looked at the injector O rings so she is...

Has anyone had problems with the brakes locking up on their Power stroke? A couple of years ago I felt a vibration in the front end and when I stopped I could smell a burning plastic smell. When I pulled away from the light, the vibration quit and didn't happen gain for almost 6 months. The...

Rebuilt ipr 2285 code a week before it died for good, scanguage shows icp is good, put new oil cooler in and egr delete while I had it apart, ficm showed 47 then dropped as low as 23 when cranking,,,need help

Wanted to intro myself my name is Jacob and havin trouble gettin my 6.0 runnin so I'm lookin for advice,,,thanks!

Hi, can someone please help me with some info.*I have a 2004*Ford*F250*6.0 power stroke I bought about 6*Months ago, it used to have a very loud whistle sound*Coming from the exhaust like jet engine and now it stopped*I don't if it's a problem or not but I would really like to get the...

Call me Charlie. I have two totally different diesels. The first is my day to day, '97 F350 Crew Cab 7.3 PowerStroke. 220,000 + and still going strong. The second falls into two categories. What I drive now and what I might be driving next week. I drive and maintain our Boy Scout bus. We...

I just purchased a 6.0 F350 the early 03 model with the round egr coolers It has 119K runs and looks cherry. I bought it with a fair amount of knowledge of the 6.0 and I got such a good deal on it that i couldn't pass it up. Anyway I was looking for some advice on what i should do first...

I have a 2003 F350 7.3l and it makes a weird noise when I am getting on it. Almost like its either not getting enough air or the turbo isn't spooling smoothly. Has anyone heard of this problem before and if so would an intake or fooling the turbo into allowing more boost solve it?

hello, i am new to this forum. i had one thing in mind when i joined. i want to ask the question: i have a 04 chevy silverado 1500 reg cab swb. i want a diesel but buying is to expensive. how practical is swapping the existing 4.3L gas to a diesel engine? and what kind could go in there...

Selling my spare set of 7.3l powerstroke heads and forged rods. Head are complete with valves, springs and rockers. Rods are 7.3l powerstroke forged rods with stock pistons. Sell heads for $50 and sell rods (with or without pistons) for $175. Prices do not include shipping.

I've been reading up on oil bypass filtration systems and I'm now afraid to drive another mile without one:gaah (well maybe not that extreme) In looking around it seems the most prevalent systems are the Amsoil and the Kleenoil systems. Does anyone here have experience with either of these...

Looking to purchase a set of 7.3L crower rods. LMK what you have available and price. Thanks.

hello, i have owned this truck for about 3 weeks its a 1996 f-250 powerstroke with 153k on it i was told all parts are original. the truck is in excellent condition with only a few very minor dents and a small dime sized bit of surface rust at the wheel well. this truck has been babied. so it...