The Diesel Garage banner

1 - 14 of 14 Posts

·
Junior Member
Joined
·
25 Posts
Discussion Starter #1 (Edited)
This is my dads truck. He bought it a couple years ago cuz he got a good deal on it and we've done little to it besides have the wheels polished and a new set of rubber. The truck is really strait and tight but has been sitting for a number of years. It has a 400hp A Cat and a 13 speed. I recently acquired access to a shop so I'll be working at getting this truck road ready. The plan is to swap out the fuel tanks to some nicer ones and move them to the stock location, mount a set of full fenders, and swap the running gear out to a 3406B and 15 speed.



 

·
Junior Member
Joined
·
25 Posts
Discussion Starter #3
I have 15speed I'll be removing soon if your interested
What's the numbers on it? I have a 15 for this project but may be interested in another.
 

·
Junior Member
Joined
·
25 Posts
Discussion Starter #5
That's what I wanted to know..
 

·
Senior Member
Joined
·
2,824 Posts
They have never made a low inertia 15spd, it would either be a RT, RTO, or a RTX.
 

·
Junior Member
Joined
·
25 Posts
Discussion Starter #8
Do all the Rto's have the top gear against the dash?
 

·
Senior Member
Joined
·
2,824 Posts
An overdrive 9 or 10 should be up against the dash, a RTX has the top plate changed to allow a normal shift pattern.
 

·
Senior Member
Joined
·
2,824 Posts
The double over Fullers do unless they have the conversion, or "X" cover I've seen and had.
That would be correct on a DO 13spd, which has an overdrive in the main box and one in the back box.
 

·
Aimless Wanderer
Joined
·
929 Posts
That would be correct on a DO 13spd, which has an overdrive in the main box and one in the back box.
Thanks, that's the only one's I've had, both RTOO-14613's. A single over is plenty fast on tall tires I've found.
 

·
Junior Member
Joined
·
69 Posts
Sweet looking 362. I'm a cabover fan. My dad had them in the 70's so I grew up around them. His even had a similar paint design to your dad's. I have an 80 352 with a V-8 cat in it that I want to do a restification on when time and money allows. Have fun with it. Those are cool rides!

RF
 

·
Junior Member
Joined
·
25 Posts
Discussion Starter #14
Sweet looking 362. I'm a cabover fan. My dad had them in the 70's so I grew up around them. His even had a similar paint design to your dad's. I have an 80 352 with a V-8 cat in it that I want to do a restification on when time and money allows. Have fun with it. Those are cool rides!

RF
Ya I've got a '79 with an 8V92 in it and we redid my brothers '83 a couple years ago... Here's a pic of his

 
1 - 14 of 14 Posts
Top