The Diesel Garage banner

1 - 2 of 2 Posts

·
********* and Mafia #90
Joined
·
14,261 Posts
Discussion Starter #1 (Edited)
Fass Fuel Filter Numbers
(this is only for the 150 SERIES application and not a cross reference for the 95 SERIES application.)
Fleetguard

Fass runs a Hydraulic filter with 1 1/2-16 threads..

HF6604 - 5 micron - 3 @ 98.7%
HF6607 - 6 micron - 6 @ 98.7 %





Napa
FIL1274 - 10 micron
FIL1202 - 5 micron

Wix
51202 - 5 micron
51274 - 10 micron

Donaldson
P169392 - 1 or 2 micron

Baldwin
BT372-10 - 10 micron
BT372-MPG - 5 micron
BT8509-MPG - 1 to 2 micron

Cim-Tek
70032 - 10 micron
70213 - 3 micron -

Airdogs fuel filters numbers
AirDog 100 & AirDog 150 (should be the same for airdogII)
Airdog runs a Fuel filter with 7/8-14 Threads.

FF100-10 (10 Micron) FleetGuard FF5617 -10 @ 98.7%
FF100-3 (3 Micron) FleetGuard FF5613 -5 @ 98.7%
WS80 (Water Separator) FleetGuard FS19768 - 140 wire mesh

SuperDog 200

FF200-10 (10 Micron) FleetGuard FS1054 - 10 @ 98.7%
WS200 (Water Separator) FleetGuard FS1023 - 100 wire mesh
 

·
********* and Mafia #90
Joined
·
14,261 Posts
Discussion Starter #2 (Edited)
Got bored and felt like having a discussion with Cummins filtration as i had a feeling some of these were wrong.. they were. Undated in the BLUE..
 
1 - 2 of 2 Posts
Top