The Diesel Garage banner

banks

15191 Views 42 Replies 14 Participants Last post by  rcfire5
are any of you guys running the new banks clean tune on their LMM. i heard it has just been released and wondering if any one has been running it and how they like it.
1 - 3 of 43 Posts
could you stack the ppe on the banks raise the rev limiter, have the change on the fly, lots of power. i believe in the banks i have a buddy with a lbz it works great looks good and has had nothing but good luck, with it, not a big fan of the ppe i had a lly with a pred, and a friend with a lbz with a ppe and it did have near the sack mine did. but i want to shut the regen off and cut the exhaust off mine and get some real **** on it. so i can get better than 15.6 mpg. its getting old really fast power is one thing ****ty millage is another along with 4.00 dollar fuel. the government needs to stay out of **** they dont know anything about.
could you stack the ppe on the banks raise the rev limiter, have the change on the fly, lots of power. i believe in the banks i have a buddy with a lbz it works great looks good and has had nothing but good luck, with it, not a big fan of the ppe i had a lly with a pred, and a friend with a lbz with a ppe and it did have near the sack mine did. but i want to shut the regen off and cut the exhaust off mine and get some real **** on it. so i can get better than 15.6 mpg. its getting old really fast power is one thing ****ty millage is another along with 4.00 dollar fuel. the government needs to stay out of s**t they dont know anything about.
i just got efilive in my truck and i asked about stacking the chips, and its a big no no it will tear ur motor up some how is what the diesel shop told me. if you are going to chip ur truck the best thing to do after is take the exhaust off or else it will run bad and get bad mpg, b/c it will just clog up whats on it, and it will breathe worse.
1 - 3 of 43 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top