So I was traveling the truck 140 miles per day and generally it's run great. Had some fuel issues around quite a while back and put the new spring unit in and it ran perfectly for seven days. Then, at that point, I began getting a wrench light come on while driving. Didn't change execution yet it came on. It was icp voltage low high and discontinuous. I put another sensor in and it didn't fix the codes. I continued to drive the truck and it deteriorated. It has been stopped for the greater part of the last eighteen months until I had the opportunity to fix. Well Somewhat recently I have put another ICP sensor with braid, new EGR valve, and new EBP sensor all from portage. It is odd at this point. It sits fine and fires up fine yet I put it in turn around for around 15 feet then when I put in drive it falters and wrench light comes on with p2286. I can do it again and again with same outcome. I never contact gas pedal. I have a ficm coming however parcel accept it will fix it, simply needed to refresh it. Different things it has done is harsh running on street and dead pedal discontinuously. Any assistance is valued. Sorry for long post. I have a scanner and am dealing with this. Simply figured I would connect. Have perused many post, saw as nothing comparative.
snaptube vidmate
snaptube vidmate
