The Diesel Garage banner

Building comounds on a Fummins

3709 Views 6 Replies 4 Participants Last post by  JPscustoms
I am getting ready to build the compounds for my truck this winter
62/14 over a S480
I have a 2nd gen manifold so I dont need that.

1.Can I use a turbo bracket from SourceAutomotive to mount the second turbo
2.What about the intermediate hot pipe. Some say I have to machine off the exhuast housing ....Any thoughts about the int. hot pipe.

I know Ill make the downpipe and the cold side pipes and not worried about them.

should run good since my injectors are way too big right now
1 - 7 of 7 Posts
why only two turbos when you can have THREE!!!!!
This should be a good thread!!
only a 62 over 480? geez, go big or go home!

Garrett
got to be able to pull a 38ft boat
got to be able to pull a 38ft boat
so you're gonna need to go big!

why not, hmm, maybe like an HE451VE over an HX82? that'd be different.

Garrett
so you're gonna need to go big!

why not, hmm, maybe like an HE451VE over an HX82? that'd be different.

Garrett
:punish:point
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top