The Diesel Garage banner

1 - 11 of 11 Posts

·
Senior Member
Joined
·
409 Posts
Discussion Starter #1
thinkin bout sellin the jeep. only sellin because i found somethin else i'd rather have, and this thing just sits and barely gets driven. gotta clean title in hand. here's a list of mods.

1993 Jeep Wrangler YJ
4BT Cummins turbo diesel(painted it black and the valve covers Dodge electric blue)
-Rebuilt pump by Southern Diesel
-Pump turned up by me
-Adjusted the throttle stop screw
-H1C Turbo
-BeCool Radiator
-Custom made Intercooler and piping
-ETS Intercooler boots
-Flex-A-Lite Electric fan
-K&N Intake filter
-Custom 5" hoodstack

NV4500 5spd tranny from newer Cummins
-Centerforce Clutch

Dana 300 tcase
-Teralow 4:1 kit
-Currie Twin Sticks
-Advanced Adapters 32 Spline HD Output Shaft kit
-Advanced Adapters AW4-D300 Adapter/Clocking Ring
-Custom Front Driveshaft
-Custom Rear Driveshaft

Dana 60 front (fullwidth)
-Detroit locker
-5.86 Yukon ring/pinion
-Yukon master install kit
-ORU kingpin rebuild kits
-Poison Spyder Bombshell diff cover
-Brand new brakes
-Manual locking hubs
-Completely rebuilt from end to end

Dana 70 rear (fullwdith)
-Detroit locker
-5.86 Yukon ring/pinion
-Yukon master install kit
-Poison Spyder Bombshell diff cover
-Custom Disc Brake Conversion
-Completely rebuilt from end to end

Steering
-Bluetorch Fab Hi-Steer Arms
-Bluetorch Fab Hi-Steer Stud Kit
-WFO Concepts Tie-rod 1.75x.250 DOM w/ 1-ton Tie-rod ends
-WFO Concepts Draglink 1.75x.250 DOM w/ 1-ton Tie-rod ends
-Custom Hydralic Assist Steering w/ HD Hydralic Lines

Front Suspension
-Bluetorch Fab front fullwidth kit w/ Bumper and D-Rings
-4" Skyjacker Softride springs/bushings
-6* shims
-Pro Comp ES9000 34" shocks
(extended wheelbase 2.5")

Rear Suspension
-Custom rear XJ kit
-XJ rear springs
-Bluetorch Fab "Bottle Opener" Shackles
-Pro Comp ES9000 32" shocks
(extended wheelbase 8")


Cage
-Custom full 6 point cage
-1.75x.120 DOM
-Bluetorch Fab cage tubing plates
-Bluetorch Fab gussets

Fuel Cell
-Budlight Keg
-12"-18" Adjustable Marine Fuel sending unit
-Summit Racing AN Fitting for pickup/return/vent
-Summit Racing Aluminum Bungs
-Summit Racing Rollover Valve
-Summit Racing Twist-Lock Hose Ends
-Blue Fuel hose from Summit Racing for pickup/return/vent
-Custom cradle 2x4" 3/8" Box tubing
-New E2000 Fuel pump

Tires/Wheels
-44x19.50-15 Swamper TSL Boggers w/ bout 400 miles
-15x14 Black Rock Krawler wheels - 2.5" backspacing w/ bout 400 miles

Seats
-Corbeau Racing Baja Seats (black/blue)
-Corbeau Racing Seat Harnesses (blue)
-Custom Seat Mounts tied into Cage w/ 1.75x.120 DOM

Stereo (only CD Player and 4x6 speakers are installed, but the rest is included)
-Pioneer CD/MP3 Player
-Pioneer 4x6" Dash Speakers
-Pioneer 6" Speakers
-Pioneer 6x9" 3 way Speakers
-Pioneer Component Speakers
-Pioneer Amp
-Scosche Wires

Random Stuff
-Custom Rear Traction Bar w/ shackle w/ 1.25x.120 DOM and Bluetorch Fab Heim Joints
-Comp Cut Rear fenders
-1" Performance Accessories body lift
-Warn winch plate
-APC headlights (bright white/blue)
-LED oval tailights
-LED clear front turnsignals (not installed yet)
-Bestop Black Softop
-Spray-In-Bedliner whole inside tub
-60" Hi-Lift Jack
















also included is a custom trailer to haul the jeep on.

2005 Big Tex trailer
I've just done alotta work to this trailer so i could fit my jeep on it. It was originally a 7x18 car hauler, but i wanted it wide enough for my jeep, so its now a 18x8.5 (same width as my gooseneck). also, there is now a piece of 5" channel welded to the top of the original tongue, and the hitch was cut off the original tongue and welded on top of the new 5" channel. i did this so i could pull it with my truck.
-tandem axle
-Hide-A-Way slide out ramps
-Electric brakes
-Brand new deck with all pressure treated wood
-Brand new paint (gloss black)
-Brand new 225/75R15 Carlisle 8 ply tires Load Range D
-Brand new LED tailights
-Brand new jack
-Brand new drive-over fenders (made from 1/4" diamondplate steel)











$15K for everything.
 

·
I now drive a Duramax...
Joined
·
318 Posts
Wow did I talk you into this with a post asking how much?:) This YJ is sick man if I had the dough I would scoop this thing up fast. Good luck with the sale and whoever buys this thing is getting a bada** rig. I think it is priced to sell. I think you could get more for it on Pirate4x4 or some place like that...

Tyler
 

·
Senior Member
Joined
·
409 Posts
Discussion Starter #3
ya, i listed it on pirate just now too. i found a built 12v i really want, so i figured i could sell this thing fast if i priced it low. ive got over $35K between the jeep and trailer, but u never get whatcha got in them.... plus, ive had the jeep 8/9 years, and i change my mind alot, so its been an ongoing money pit :bang

oh well, someone will get a good deal and enjoy this thing.... i just dont have time and would rather get somethin else i could use more often
 

·
I now drive a Duramax...
Joined
·
318 Posts
If you wanna take my advice it is up to you, but I wouldn't drop my price any lower than that. Those axles alone are ore $5,000, engine is what like $3,000, suspension and set-up is over a grand, cage $2,000 ect. that thing is a steal and to throw the trailer in extra, wow. Like I said before good luck with the sale, sweet rig for the buyer.
 

·
Senior Member
Joined
·
409 Posts
Discussion Starter #5
If you wanna take my advice it is up to you, but I wouldn't drop my price any lower than that. Those axles alone are ore $5,000, engine is what like $3,000, suspension and set-up is over a grand, cage $2,000 ect. that thing is a steal and to throw the trailer in extra, wow. Like I said before good luck with the sale, sweet rig for the buyer.
yup! between the axles, steering, and tcase, i've got $9K in them... and i was offered $2500 for the trailer 2 weeks ago, and only turned it down because i have no other way to pull the jeep since i cant pull the gooseneck with my truck.
 

·
Member
Joined
·
77 Posts
I want to put the same engine in a YJ. Do you remember the cost of doing the swap? Engine, trans, install etc..... I want to make a street/trail ride. You have a awesome rig. Any videos?
 

·
Senior Member
Joined
·
409 Posts
Discussion Starter #7
I want to put the same engine in a YJ. Do you remember the cost of doing the swap? Engine, trans, install etc..... I want to make a street/trail ride. You have a awesome rig. Any videos?
me and my buddy did the swap, didnt take long, bout 13 hours i think of total work... it was easy as hell, alot easier than i thought it'd be. and as far as a price on the motor, tranny, etc... i cant remember, and dont wanna remember! lol not cheap.... i got a couple videos, but no good ones....



 

·
Senior Member
Joined
·
409 Posts
Discussion Starter #8
SOLD!
 

·
Senior Member
Joined
·
497 Posts
I wonder what kind of person would buy a Jeep with a Cummins. Man what a ride. That thing is sweet, kinda hard to get anything done with it around, I find myself in the driver seat all the time. Thanks for a great Jeep, hope to run up with ya again sometime soon.

Smokin 09 is right around the corner.
 

·
Senior Member
Joined
·
409 Posts
Discussion Starter #11
lol ya man, i cant believe i got rid of it. i hope u enjoy it though. call me monday bout the PM u sent me.
 
1 - 11 of 11 Posts
Top