The Diesel Garage banner

engine swap 12 v to 24.. v

1K views 8 replies 8 participants last post by  sstockton 
#1 ·
i got a 95 12 v... lost all its power and its starting to get some miles on it and i wanted to get the 24 v but keep my truck.. besides fuel lines, tranny - transfer case. what else would i have to do to put a 24 in my truck? and how much money
 
#2 ·
P-Pump a 24v. :D You've got some of the parts already.
 
#4 ·
yea p-pumping the 24v would be your best bet for power and reliability
 
#5 ·
i got everything... my buddy bought a parts truck off e bay .. for his 5.9 magnum and whn it got there it was a 1998 24v with 67,000 no tranny, no front end he said i could have the motor for 1,000$ how much engine bay things will i have to change to make it fit? and what else do i have to do ?
 
#7 ·
bowtiestrokersmoker said:
The more important issue here is what are you going to do with the old 12v?
:whs
 
#9 ·
Yeah, you should just have to change out the tranny, but you'll want to anyways, its a good time to put in a DTT. Then just buy the p-pump adapter kit, and while you have the motor out, start going to town on it. Make it a real hot rod.
Sean
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top