The Diesel Garage banner

1 - 4 of 4 Posts

·
Senior Member
Joined
·
568 Posts
Discussion Starter #1
What is the dilema that is encountered when changing from mechanical fuel delivery to electric ? When I hear people discuss the change I then here that only one tank can be used after the change was made . How can this be fixed ? Would it be possible to use two pumps instead of one that are controlled by the tank switch ?
I am wanting to change mine over , but , I am concerned that I am going to lose my fuel capacity .

Thanks to everyone posting .
 

·
Junior Member
Joined
·
187 Posts
I am still using both tanks on mine with no problems with 1 SD pump and stage 1 injectors, and using all the stock lines with no pressure drop. Now if you have big injectors and need tones of fuel then you would need to either sump your tanks together or get the big bronco tank.
 

·
Senior Member
Joined
·
568 Posts
Discussion Starter #3
I am running stage II's the truck hasnt been put back together yet so I dont know what I am going to run into . I still have the 15* hpop and I am sure that I will have to change it .
 

·
rock removal technition
Joined
·
589 Posts
Im runnin babyswamps on my 96 with a sd pump and custom lines.
works good with the 2 tanks
went to hook up a fass pump but the selector valve is to restrictive for that.
 
1 - 4 of 4 Posts
Top