The Diesel Garage banner

HE351VE installed on an 04 CR Fummins

5191 Views 6 Replies 4 Participants Last post by  dzljon
i started with a turbo removed from a 2010 ram and a 6.7 manifold then installed a M16x 1.5 to -10AN in the coolant ports on the turbo, the 1/2NPTon the head was reduced down to 3/8NPT x -10AN, the Return was routed a port i welded on the suction side of the water pump, standard 5/8 heater hose was used for the plumbing.


See less See more
1 - 1 of 7 Posts
Have you noticed a difference from the old turbo to the VGT?
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.