The Diesel Garage banner

1 - 1 of 1 Posts

·
Senior Member
Joined
·
186 Posts
Discussion Starter #1
Seems my no start condition has come back. I had no problems for a few months after i installed a HPOP gage and the line burst pumping apprx 6-8 qts all over the truck and driveway. Now it is back with a vengence HPOP oil level is good, CPS changed Not sure about the pump i removed the gage paranoid after the last one. Anyway it seems to me that something sensor / valve is sticking it is always when it is warm (has correct oil in it),it throws no codes, and generally starts back up after apprx 20 tries. I have tapped on the sensor in the driver head at the front once and she fires right up. Is there a way to jumper it? seems it has 3 wires and i assume it is the oil pressure switch. Is there a test for the switch itself??? any help is appreciated.
 
1 - 1 of 1 Posts
Top