The Diesel Garage banner

1 - 20 of 23 Posts

·
Super Moderator
Joined
·
3,188 Posts
Discussion Starter #1 (Edited)
This is our little classifieds.
Simple rules:
-must be related to Med and/or Heavy Duty trucks/buses, etc.
-No cross links to a competitor's forum.
-links to craigslist ads are ok(not the personals section).
-must include location and price, or it gets deleted.
-pictures always help!
 

·
Supporting Vendor
Joined
·
39 Posts
WE HAVE 150 RECON ECMS IN STOCK: CUMMINS CAT-DETROIT-IHC-MACK
WE DO HP AND TORQUE UPGRADES AND EMISSION DELETION TUNING
WE ARE AN AUTHORIZED VENDOR OF DIESELGARAGE.COM
CALL OR EMAIL US WITH ANY ECM ISSUES YOUR HAVING

REGARDS DON JENNER
JBALLELECTRONICS.COM
 

·
Junior Member
Joined
·
4 Posts
1983 Peterbilt 359 Flat top

1983 Peterbilt 359
400 Cummins Big Can III
14613 tranny
3.70 Rockwell rears on spring
Very clean truck from N. Mexico that runs and drives.
No cracks in dash, and a/c still works!!
Believe it really has under 500k original miles.
$14,500 Call Shawn 440-281-5339
Truck is in Odessa, Tax. Thanks
 

·
Junior Member
Joined
·
1,811 Posts
Turbo and Injectors

I have a like new Borg Warner (Perkins) S-500. Part #318883. Comes with 1.15, 1.45, and 1.60 exhaust housings. Will include flange pipe to connect to your exhaust.

Also a set of new Far Call (Australia) balanced injectors. Comes with flow sheet with 5 sets of trims for 25-29 cc of flow. Less than 5000 miles on all. Selling truck, don't need anymore. Injectors alone will give your E-C15 175-200 hp.

Will separate. Turbo and housings $2500. Injectors $3000 OBO.

Central NC. Eric 336-209-3309
 
  • Like
Reactions: t800kwopper

·
Junior Member
Joined
·
5 Posts
CUMMINS 5263305PX ISM ISL FUEL INJECTOR

I have for sale (4) Genuine Cummins Diesel Fuel Injectors. Part # 5263305PX. Fits multiple applications. These retail for over $800 each new from truckhelp and nearly $400 each from Peterbuiltparts remanufactured!

Will sell for $1000 shipped in continental U.S. Overseas buyer's pay actual shipping.

Please check your application before purchase. ALL SALES ARE FINAL.

There is a $140 core charge on your old item, which will be refunded

after your old item is returned in the original packaging.

Item MUST be in ALL original packaging in order to receive credit.

NO EXCEPTIONS!

If your part is damaged, then a partial credit will be refunded, depending

upon amount of damage.

NO EXCEPTIONS!

(**FAILURE TO FOLLOW THE CORE POLICY WILL DELAY YOUR ORDER**):
Core Charge = $140.00 Each Per Injector (not included in the price shipped)

Core(s) must be sent back within 30 business days from the day we ship your order(s). Core(s) is sent back at customers expense.

***YOU HAVE TWO (2) OPTIONS REGARDING THE CORE (CHOICES BELOW).

1. YOU MAY CHOOSE TO SEND IN THE CORE FIRST. ONCE WE RECEIVE THE CORE(S), WE WILL SHIP YOUR NEW ITEM

2. YOU MAY CHOOSE TO PAY THE CORE FEE UP FRONT THROUGH PAYPAL. WE WILL SEND YOU A REQUEST FOR MONEY FOR THE FULL CORE FEE AND REFUND YOU ONCE THE CORE IS RECEIVED.

***PLEASE NOTE THAT ANY CORE RECEIVED AFTER 30 DAYS, WILL ONLY RECEIVE A CREDIT OF 50% AND YOU WILL BE CHARGED THE REMAINING BALANCE***

NO REFUND WILL BE ISSUED FOR CORES RECEIVED AFTER 60 DAYS***
 

·
Junior Member
Joined
·
57 Posts
I have the following:
8v92 detroit, 150,000 miles, jakes, complete
6v92 detroit, 350,000 miles complete
eaton 15 speed
eaton 9 speed
allison 740, 350,000
spicer R8341-G auxillary trans 350,000
rockwells SQHD 4.33 spring, front and rear 350,000
rockwells SQHP 4.11 torsion front and rear, 150,000

PM me if interested in anything
 

·
Junior Member
Joined
·
167 Posts
Have a brand new set of the old maroon colored Peterbilt American Class interior door panels for sale. You can't get these anymore, the tooling they used to make them was destroyed in a fire and they aren't in stock anywhere anymore.

Will take $700 for the set which is less than what Peterbilt got for them when they had them. PM me if interested.

 

·
Member
Joined
·
414 Posts
detroit diesel tunp tools and parts

I have some Detroit diesel tools for sale I have a few time pins and line socket and the gauges for the delay also have 3 rebuilt injectors for 92 also have a govnor for a 3-71 to 6-71 Detroit exhaust manifold for a 371 6 speed over drive traney for a mack truck


open for offers
 

·
oldskool
Joined
·
61 Posts
359 flat top sleeper

I have an 84 359 model flat top sleeper for sale that is in pretty good condition. Black and grey interior .also have a set of good working 349d Jakes.641-436-1198 call or text if interested
 

·
Member
Joined
·
414 Posts
AIR STARTER

I have a 150bmp air starter for sale it came off a 250 HP Cummins I have the valve for the tank and starting valve. core valve is worth 550.00 so it should be worth more then that, took it off a truck that sat for 5 years I took it off last fall so it sat in my shop since then can ship
 

·
Junior Member
Joined
·
1,811 Posts
Garrett GT55

Garrett GT55 with Billett comp wheel. 83mm X 123mm. High flow .69 A/R.
1.18 A/R high flow wastegate turbine housing with 102mm X 111mm UHP turbine wheel. Ball bearing.
New, never installed. Cost $3800 new....sacrifice at $1600. Has T-6 flange will fit any Cat or Detroit.
Located central NC. 336-209-3309. Will ship
 

·
Junior Member
Joined
·
1,811 Posts
Got a like new set of 211-3026 injectors. These are known as 56's...but flow between a 58 and 59. Will add 175-200hp to any E or C15. Paid $4500, will take $3800obo. These are new Cat, not reman.

Eric 336-209-3309

Sorry I typed the wrong numbers. It's not a 56 it's a 10R-9787
 

·
Junior Member
Joined
·
308 Posts
6NZ 550 Turbo

I believe it's an CAT OR7923/Borg Warner 1678721 if my memory is correct. It's a wastegated turbo, does 33psi, and in good shape. Still on my Pete right now but I'm putting a bigger one on soon to match the higher HP I'm at. Thought I'd post it here now in case anyone is looking for one. I've seen similar used turbos listed online for anywhere from $300 to $1000 but I really don't know what it's worth. UI'm not looking to make top dollar off anyone in need and I'm open to reasonable offers + shipping if necessary. I'm in Dubuque, IA and could make this happen with 3-5 days notice if you need it now. Otherwise I plan on pulling it when I get home in a few weeks.
Call or text Jerry @ 563-543-7119 or PM me here. Asking $600 or make me an offer.
 

·
Senior Member
Joined
·
2,824 Posts
Looking for a 3406B/C exhaust manifold used in the ford trucks, has an odd angles flange on it, I have a good standard square port manifold if someone is interested in trading.
 

·
Senior diesel friend
Joined
·
266 Posts
2004 International 4300 truck with Swaploader SL-180 Hooklift hoist.
Cab: Standart
Color: White

Engine: International DT-466
Engine Brake: No
Horsepower: 195 Hp, Gets up to 15 MPG!!!
Fuel Type: Diesel

Transmission: Manual 6 speed, Made by Eaton/Fuller
Overdrive: No

Brakes: hydraulic (no air endorsement needed)

Chassis:
Wheelbase: 188 (in)
Cab to Axle: 120 (in)
Suspension: Spring
Number of Rear Axles: 1
Gross Vehicle Weight: 29,000 (lb) Registered as 26,000 lb ( no CDL needed)
Front Axle Weight: 10,000 (lb)
Rear Axle Weight: 19,000 (lb)
Ratio:

Mileage: 56,361 (miles) it is not mistake. Extremely low miles!!!

Wheels: Steel
Tires: 11R22.5 Good shape

New, never used hooklift:
Swaploader SL-180
Capacity: 18,000 lb minimum
Body: 14-18 foot long
Hook height: 36" AND 54"

Please call (6O3) 5O8-1O6O
Victor

Note: the picture of same truck just no stack and no strobes. No containers included.

Here is some pictures
 

Attachments

·
Junior Member
Joined
·
308 Posts
Finally bought a turbo and the 0R-7923 is coming off my truck next week. If anyone here wants/needs it tell me now and it's yours. We'll work something out. Otherwise I'm gonna ebay it next weekend.
It's in good working order and surprisingly good shape given it's age from what I could tell when I dropped the elbow a month ago. I've been extra careful to not let it see excessive heat even once and it's always been wastegated at 32psi.
Make me an offer and it's yours. I'd rather sell it to someone here that needs it so tell me what you're willing to pay for it. Simple as that. I'll ship it for whatever it costs to ship.
 

·
Junior Member
Joined
·
308 Posts
Finally bought a turbo and the 0R-7923 is coming off my truck next week. If anyone here wants/needs it tell me now and it's yours. We'll work something out. Otherwise I'm gonna ebay it next weekend.
It's in good working order and surprisingly good shape given it's age from what I could tell when I dropped the elbow a month ago. I've been extra careful to not let it see excessive heat even once and it's always been wastegated at 32psi.
Make me an offer and it's yours. I'd rather sell it to someone here that needs it so tell me what you're willing to pay for it. Simple as that. I'll ship it for whatever it costs to ship.
Sold for $380.00 on ebay the 2nd day.
 

·
Junior Member
Joined
·
167 Posts
I have a complete running 6NZ for sale. It's set at 435 HP but it's identical to a 475/550. No parts differences. $9000. PM me for details.
 

·
Junior Member
Joined
·
193 Posts
Have two 3406b mechanical injection pumps with timing advance. $500 each. Work but need reasealling. In the dallas area
 
1 - 20 of 23 Posts
Top