[sheniawolf]

Hello all,
I am jumping on here to ask a simple question what is left to do to "bulletproof" my 2006 F350 6.0 powerstroke.
Here's what I have done so far all new parts listed below
EGR valve
ICP valve
IPR valve
stand pipes
dummy plugs
fuel injectors
FICM
glow plugs
starter
Can someone please just give me a list of parts that are left to finish doing the "bulletproofing" on this pos truck so I don't have to
deal with any of this again please

 

[bismic]

Unfortunately there are a lot of unreliable parts for the 6.0L. Some unreliable OEM ones, and MANY unreliable aftermarket ones.

Just replacing parts isn't the key to success. You have to install the correct parts.

Can you post up where all the parts you listed were purchased from?

 

[sheniawolf]

I seriously just need a list of parts where I get my parts was not a part of the question I know about "unreliable" parts
and buy accordingly.

 

[bismic]

You clearly do not need my help. If you say that you know about unreliable parts, yet you post that you don't know which ones are unreliable, then I say you need a new/different truck. The two issues are inseparable on a 6.0L. Just the use of the word "bulletproof" indicates a rudimentary knowledge of these engines. There is no such thing as bulletproof. That said, I answered all these questions in the sticky thread that is posted just above this one - back in 2010 (it is the first thread listed in this forum - kept there for reference).

Oh, and the ICP isn't a valve - it is a sensor.

Best of luck

 

[sheniawolf]

i never once asked about unreliable parts I really just needed a list of parts to complete the "bypass" (if that's what you need) I am doing this in sections so i can afford the best parts for the truck.
BTW Mark "Bulletproof" is actually a reference to the first shop in Mesa AZ (Bullet Proof Off Road) that figured out the bypass to the egr issues with these trucks. I promise you I know this engine and for you to be disrespectful because I don't need your opinion about who does and doesn't make the best parts for my truck is ridiculous. So maybe you don't know what I need and you probably buy kits to fix your issues instead of doing your due diligence to find out how that particular part preforms for your truck. So no Mark I clearly don't need your help. have a great day

 

[bismic]

LOL - with that approach you are doomed to experience the worst of the (quote "pos") 6.0L. Clearly you have already replaced a number of reliable OEM parts for some odd reason (with who knows WHAT quality part). Nothing wrong with ignorance until a person revels in it. You are at least right about the term BulletProof being associated with a shop in Arizona, but you clearly used the term generically, which is a complete misnomer. Additionally BPD never offered an EGR bypass, they offered a reliable EGR cooler. They do offer a form of a bypass on the OEM oil cooler, but that hasn't even been mentioned. Wow! Only a propensity for arguments would cause you to try to sell the shop reference as your intent. You didn't even mention their EGR cooler or oil cooler, lol.

 

[sheniawolf]

Please go away Mark........you have nothing to bring to the conversation except trying to sell me on what ever parts company you work for.
I have not put on my HPOP or EGR cooler which btw i purchased directly for Bullet Proof all I wanted was a list of things to be done at the same time
you mark are an annoyance because included with the list of things i have left to do that would have been included since those two parts weren't included with the list of things that
I've done and they are important. The truck is a project I don't drive it and won't till all the repairs are made. Hell I'm doing the brakes right now and just finished replacing the starter
this morning. I know my truck sir and since you have nothing relevant to offer I bid you good day.

 

[MaxTune]

Pull the engine and replace with a cummins......troll

 

[bismic]

I think this person may simply want to have a list of parts replaced SOLELY to be able to say it is bulletproofed ....... in order to sell it to a teenager or unsuspecting person. No intention of reliability. No concern for the buyer. The company BulletProofDiesel, has answered these questions for countless people, by phone, by email, in the forums, on their web site, and in person. Here is a person that says they are buying MANY expensive parts from BPD, but clearly hasn't even talked to them. Hmmm!

OR (probably more likely)

+ for the 1 troll

LOL - replacing an unreliable '06 HPOP. What a joke, like that is a common problem part!

Does BPD even advertise selling a 6.0L HPOP .........go check it out!

What a shame to even have this thread here. Ālea iacta est

 

[Jasong]

This thread is going downhill fast.
Please see the sticky Click here.

 

[Bigem1951]

I seriously just need a list of parts where I get my parts was not a part of the question I know about "unreliable" parts
and buy accordingly.

Don’t bite the heads off of people giving advice.. You ask for help! “Bullet proofing” is a term that is like shooting blanks..
No such thing as bullet proofing any engine weather diesel or gas will ever exist.
Parts wear out and the use of any manufactures part is only a matter of time before failure will occur..
Some companies promise to do a job they can’t totally deliver..
After spending thousands of dollars you will come to realize that best money spent is on routine maintiance .. Spend it wisely in doing your research..
Fact of live.. Time will tell..

 

[Ambrosepiu]

Hello all,
I am jumping on here to ask a simple question what is left to do to "bulletproof" my 2006 F350 6.0 powerstroke.
Here's what I have done so far all new parts listed below
EGR valve
ICP valve
IPR valve
stand pipes
dummy plugs
fuel injectors
FICM
glow plugs
starter
Can someone please just give me a list of parts that are left to finish doing the "bulletproofing" on this pos truck so I don't have to
deal with any of this again please

I got this list too.